Accessories & Stainless Steel Small Parts
All items: Accessories & Stainless Steel Small Parts (73)

Cleaningfrom 4,38 EUR
Stainless steel cover rosettesfrom 3,92 EUR
Stainless steel ballsfrom 1,50 EUR
Stainless steel post holdersfrom 65,69 EUR
Stainless steel push-fit fittingsfrom 11,27 EUR
Stainless Steel Plugs, Caps, End Capsfrom 1,80 EUR
Stainless Steel Wall/Floor Flangesfrom 8,89 EUR
S-hooksfrom 2,19 EUR
Stainless steel small parts for clothes rails, handrails and balustrades: wall and floor flanges, cover rosettes, plugs and end caps, balls, push-fit fittings, post holders, S-hooks and care products. Matched to the standardised tube diameters.
Choosing the right stainless steel small parts
Whether you are extending a clothes rail, building a handrail or repairing a balustrade, what matters is that small parts fit the tube exactly. Three details are enough: outside diameter, wall thickness and material.
The standardised tube diameters
Stainless steel tubes for balustrades, handrails and clothes rails follow the dimensions of the tube standards. The outside diameter is derived from the nominal size (DN), which is stated in inches:
| Outside diameter | Nominal size | Inches | Typical use |
|---|---|---|---|
| 21.3 mm | DN 15 | 1/2" | slim clothes rails, infill bars |
| 26.9 mm | DN 20 | 3/4" | clothes rails, cross bars |
| 33.7 mm | DN 25 | 1" | clothes rails, wall handrails |
| 42.4 mm | DN 32 | 1 1/4" | handrails, balustrade rails, posts |
| 48.3 mm | DN 40 | 1 1/2" | balustrade posts, rails |
| 60.3 mm | DN 50 | 2" | heavy-duty posts, supports |
The wall thickness of our tubes is generally 2 mm. Plugs and push-fit fittings sit inside the tube and must therefore match the inside diameter: outside diameter minus twice the wall thickness, so 29.7 mm for 33.7 × 2 mm. When working with existing tubes, always measure both: the outside with a vernier calliper and the wall at the open end of the tube.
The product areas at a glance
- Wall and floor flanges secure tubes to the wall, floor or ceiling.
- Cover rosettes conceal anchor plates and screws.
- Plugs and end caps close open tube ends neatly and safely.
- Balls serve as end pieces, decoration or hanger stops.
- Push-fit fittings join tubes without welding.
- Post holders fix balustrade posts to the side of stairs and landings.
- S-hooks extend any clothes rail.
- Cleaning: abrasive fleece and care products for stainless steel surfaces.
Materials
Our small parts are predominantly made of V2A (1.4301, AISI 304), which is durable indoors and in normal outdoor conditions. Turned parts are often made from 1.4305, a V2A with added sulphur that machines better. Close to the coast, at swimming pools or in contact with road salt, V4A (1.4404) is the more resistant choice. Do not combine stainless steel with galvanised or black steel screws: where they make contact, corrosion occurs in the presence of moisture. Always use stainless steel screws.
Choosing matching finishes
Most of our parts are ground to grit 240, matching ground tubes. Hollow balls have a finer satin finish (grit 400 to 600), plugs are finely turned and S-hooks are polished. If you combine parts from different manufacturers, match the finish with an abrasive fleece worked in the direction of the grain.