Stainless Steel Wall/Floor Flanges

Stainless Steel Wall/Floor Flanges

Stainless steel flanges for wall, floor and ceiling, round and oval, for tubes from 21.3 to 60.3 mm. The tube is pushed through and secured with a lateral grub screw; a rosette is not necessary.

Items 1 to 9 of 9
ImageDescriptionItem no.DimensionMaterialUnitPriceDelivery timeBuy
Stainless Steel Wall Connector for Tube Ø 33.7 mm, Concealed Fixing43208Diameter 33,7 mmA2 / V2Asingle9,16 EUR per piece3 to 5 working days
Stainless steel flange for 21.3 mm tubeP70213A4 / V4Asingle8,89 EUR per piece3 to 5 working days
Stainless steel flange for 26.9 mm tubeP70269A4 / V4Asingle9,14 EUR per piece3 to 5 working days
Stainless steel flange for 33.7 mm tubeP070400A2 / V2Asingle9,39 EUR per piece3 to 5 working days
Stainless steel flange for 42.4 mm tubeP070500A2 / V2Asingle10,64 EUR per piece3 to 5 working days
Stainless steel flange for 42.4 mm tube, ovalP07550A2 / V2Asingle11,27 EUR per piece3 to 5 working days
Stainless steel flange for 48.3 mm tubeP070600A2 / V2Asingle14,03 EUR per piece3 to 5 working days
Stainless steel flange for 48.3 mm tube, ovalP075600A2 / V2Asingle13,78 EUR per piece3 to 5 working days
Stainless steel flange for 60.3 mm tubeP70603A4 / V4Asingle31,31 EUR per piece3 to 5 working days

Flanges for tube constructions: designs and selection

Round flange

The round stainless steel flange is the universal solution for clothes rails, handrail ends, supports and balustrade posts. It is made of V2A (AISI 304), ground to grit 240 and shaped so that it looks good without a cover rosette. The holes are countersunk so that countersunk screws finish flush; the flange for 33.7 mm has three holes of 5.5 mm. We stock round flanges for 21.3, 26.9, 33.7, 42.4, 48.3 and 60.3 mm.

Oval flange

The oval design for 42.4 and 48.3 mm has four countersunk holes of 6.5 mm, which are spaced further apart along the length. This gives greater leverage against tilting in one direction. Oval flanges are therefore the better choice for posts that are loaded mainly in one direction, and for narrow surfaces such as stair strings or wall copings.

Wall connector with concealed fixing

For tubes of 33.7 mm there is the wall connector with concealed fixing made of 1.4301, ground to grit 320. It is screwed to the wall, the tube is fitted on, and no screw is visible from the front. Typical for handrails on a stairwell wall and for clothes rails in a minimalist design.

Fixing

Choose screws that match the hole pattern, made of stainless steel and with a countersunk head. Expansion anchors hold in concrete and solid brick; in perforated brick and aerated concrete, long-shank plugs or injection anchors are suitable. For floor mounting outdoors, place the flange on a slightly raised, level surface so that no water can stand beneath it. Do not tighten the grub screw until the tube is aligned.