13,78 EUR

Stainless steel flange for 48.3 mm tube, oval

Item no.:P075600
Status:Available, expected to ship from 26.11.2026
Delivery time:3 to 5 working days
13,78 EUR
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Fast shipping

Description

The tube is pushed through and fixed with a lateral grub screw. No cover rosette is needed, as the flange has a very attractive shape.

  • Material: AISI 304 V2A
  • Finish: grit 240 ground
  • 4 countersunk holes of 6.5 mm

Matching screws and tubes are available in our shop.

Stainless steel flange: features and applications

The flange connects a tube to a wall, floor or ceiling. The tube is pushed through and fixed with a lateral grub screw. The flange is shaped so that it looks good without a cover rosette; the holes are countersunk so that countersunk screws finish flush.

Typical applications

  • Base and wall fixing points for handrails and balustrade posts
  • Clothes rails between two walls
  • Supports, frames and room dividers made of round tube
  • Shopfitting, counters and footrests

Round or oval

The round flange absorbs load evenly from all directions. The oval shape with four holes has the holes further apart and therefore more leverage against tilting in one direction; it suits narrow surfaces such as stair strings or wall copings.

Installation

Choose stainless steel countersunk screws to suit the hole. In concrete and solid brick, expansion anchors hold well; in perforated brick and aerated concrete, use long-shank plugs or injection anchors. Only tighten the grub screw once the tube is aligned. Outdoors, place the flange on a level, slightly raised surface so that no water stands underneath.

All versions

for tubeArticle number
21.3 mmP70213
26.9 mmP70269
33.7 mmP070400
42.4 mmP070500
42.4 mm ovalP07550
48.3 mmP070600
48.3 mm oval (this page)P075600
60.3 mmP70603

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
Email: info@steel-deal.de

Frequently asked questions

Welche Dübel benötige ich für die Montage?

Passende Nylon-Spreizdübel (Ø 6 bis 12 mm) sind separat in unserem Shop erhältlich. Geeignet für Beton, Mauerwerk und Lochziegel. Tipp: Bohrlochtiefe = Dübellänge + Dübeldurchmesser.