SPRENGER

Bollards and cleats

8 Artikel
Gefertigt in DeutschlandIserlohn seit 1872Schneller Versand

Sprenger cleats with two or four holes in stainless steel, aluminium, plastic and brass, as well as bollards in stainless steel. Length, hole spacing and hole diameter are given for each version.

Artikel 1 bis 8 von 8
BildBezeichnungArt.-Nr.MaßWerkstoffEinheitPreisLieferzeitKaufen
Cleat 2-hole, aluminium5 Ausführungenab 19,80 EUR je Stück3 bis 5 WerktageAlle Ausführungen
2-hole cleat, stainless steel9 Ausführungenab 7,40 EUR je Stück3 bis 5 WerktageAlle Ausführungen
2-hole cleat, plastic10 Ausführungenab 2,15 EUR je Set3 bis 5 WerktageAlle Ausführungen
4-hole cleat, aluminium6 Ausführungenab 22,80 EUR je Stück3 bis 5 WerktageAlle Ausführungen
Cleat, brass, 40 mmSPR-3380004033MessingVerpackungseinheit: 10 Stück6,80 EUR je Stück1 VE = 67,99 EUR3 bis 5 Werktage
Bollard, stainless steel2 Ausführungenab 54,90 EUR je Stück3 bis 5 WerktageAlle Ausführungen
ø 50 mmSPR-3383005056Edelstahleinzeln54,90 EUR je StückStaffelpreis ab 20 Stück3 bis 5 Werktage
ø 60 mmSPR-3383006056Edelstahleinzeln63,60 EUR je StückStaffelpreis ab 20 Stück3 bis 5 Werktage
Cleat, 4 holes, stainless steel, 150 to 300 mm4 Ausführungenab 14,25 EUR je Stück3 bis 5 WerktageAlle Ausführungen
L 150 mm, B1 44 mmSPR-3382415056EdelstahlVerpackungseinheit: 4 Stück14,25 EUR je Stück1 VE = 56,99 EUR3 bis 5 Werktage
L 200 mm, B1 52 mmSPR-3382420056EdelstahlVerpackungseinheit: 4 Stück21,00 EUR je Stück1 VE = 83,99 EUR3 bis 5 Werktage
L 250 mm, B1 67 mmSPR-3382425056EdelstahlVerpackungseinheit: 4 Stück31,25 EUR je Stück1 VE = 124,99 EUR3 bis 5 Werktage
L 300 mm, B1 71 mmSPR-3382430056EdelstahlVerpackungseinheit: 4 Stück51,00 EUR je Stück1 VE = 203,99 EUR3 bis 5 Werktage
Cleat, 4 holes, stainless steel, 100 to 250 mm5 Ausführungenab 10,75 EUR je Stück3 bis 5 WerktageAlle Ausführungen

Choosing and fitting cleats and bollards

Designs and materials

Cleats are available with two or with four holes. Some of the 2-hole stainless steel cleats are mirror polished and made of AISI 316; the other stainless steel cleats are made of stainless steel. Cleats in aluminium, plastic and brass are also available. The stainless steel bollards have four holes for fixing.

Size according to rope

A common rule of thumb links cleat length and line diameter: for every 1/16 inch (1.6 mm) of rope diameter, about 1 inch (25.4 mm) of cleat length, so roughly 16 times the diameter. Heavy boats and boats with a large windage area need longer and stronger cleats. Mooring cleats at the bow and stern may need a higher working load than cleats for spring lines or fenders.

Fitting

In storm damage, cleats were more often torn out of the deck than they broke. A solid substructure and a backing plate below deck are therefore important. Through-bolts with washers and a backing plate are recommended, together with a sealant to prevent leaks. Cleats are aligned according to the direction of pull of the mooring lines and the fairleads.

If aluminium cleats are fixed with stainless steel screws, the aluminium can be attacked by contact corrosion in the presence of moisture, even with a favourable area ratio in a maritime atmosphere. Insulating washers or plastic sleeves cover the vulnerable areas. Stainless steel cleats and bollards are cleaned without steel wool and without tools made of ordinary steel, because iron particles can cause extraneous rust.