
Example image
- Made in Germany since 2009
- Fast shipping
Description
The tube is pushed through and secured with a grub screw at the side. A cover rosette is not required, as the flange has a very attractive shape.
- Material: AISI 304 V2A
- Finish: grit 240 ground
- 3 countersunk holes à 5.5 mm
Matching screws and tubes are available in our shop.
Stainless steel flange: features and use
The flange connects a tube to a wall, floor or ceiling. The tube is pushed through and secured with a grub screw at the side. The flange is shaped so that it looks good without a cover rosette; the holes are countersunk so that countersunk screws sit flush.
Typical applications
- Floor and wall fixing points for handrails and balustrade posts
- Clothes rails between two walls
- Supports, frames and room dividers made of round tube
- Shopfitting, counters and footrests
Round or oval
The round flange absorbs load evenly from all directions. The oval shape with four holes has the holes further apart and therefore more leverage against tilting in one direction; it suits narrow surfaces such as stair strings or wall copings.
Installation
Choose countersunk screws made of stainless steel to suit the hole. In concrete and solid brick, expansion anchors hold; in hollow brick and aerated concrete, use long-shank plugs or injection anchors. Tighten the grub screw only once the tube is aligned. Outdoors, place the flange on a level, slightly raised surface so that no water stands underneath.
All versions
| for tube | Article number |
|---|---|
| 21.3 mm | P70213 |
| 26.9 mm | P70269 |
| 33.7 mm | P070400 |
| 42.4 mm (this page) | P070500 |
| 42.4 mm oval | P07550 |
| 48.3 mm | P070600 |
| 48.3 mm oval | P075600 |
| 60.3 mm | P70603 |
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
E-mail: info@steel-deal.de
Frequently asked questions
Welche Dübel benötige ich für die Montage?
Passende Nylon-Spreizdübel (Ø 6 bis 12 mm) sind separat in unserem Shop erhältlich. Geeignet für Beton, Mauerwerk und Lochziegel. Tipp: Bohrlochtiefe = Dübellänge + Dübeldurchmesser.