8,89 EUR

Stainless steel flange for 21.3 mm tube

Item no.:P70213
Status:Available, expected to ship from 26.11.2026
Delivery time:3 to 5 working days
8,89 EUR
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Fast shipping

Description

The tube is pushed through and secured with a grub screw at the side. No cover rosette is needed, as the flange has a very attractive shape.

  • Material: AISI 316 V4A
  • Surface: grit 240 ground
  • 3 holes of 5.5 mm, countersunk

You will find matching screws and tubes in our shop.

Stainless steel flange: properties and use

The flange connects a tube to a wall, floor or ceiling. The tube is pushed through and secured with a grub screw at the side. The flange is shaped so that it looks good without a cover rosette; the holes are countersunk so that countersunk screws sit flush.

Typical applications

  • Floor and wall fixing points for handrails and balustrade posts
  • Clothes rails between two walls
  • Supports, frames and room dividers made of round tube
  • Shop fitting, counters and footrests

Round or oval

The round flange absorbs load evenly from all directions. The oval shape with four holes has the holes further apart and therefore more leverage against tilting in one direction; it suits narrow surfaces such as stair strings or wall copings.

Installation

Choose stainless steel countersunk screws to match the hole. In concrete and solid brick, expansion anchors hold well; in perforated brick and aerated concrete, use long-shank plugs or injection anchors. Only tighten the grub screw once the tube is aligned. Outdoors, place the flange on a level, slightly raised surface so that no water collects underneath.

All versions

for tubeArticle number
21.3 mm (this page)P70213
26.9 mmP70269
33.7 mmP070400
42.4 mmP070500
42.4 mm ovalP07550
48.3 mmP070600
48.3 mm ovalP075600
60.3 mmP70603

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
E-mail: info@steel-deal.de

Frequently asked questions

Welche Dübel benötige ich für die Montage?

Passende Nylon-Spreizdübel (Ø 6 bis 12 mm) sind separat in unserem Shop erhältlich. Geeignet für Beton, Mauerwerk und Lochziegel. Tipp: Bohrlochtiefe = Dübellänge + Dübeldurchmesser.