Stainless steel post holders
Stainless steel post holders for the side mounting of railing posts on stair stringers, landings, balcony slabs and concrete edges.
| Description | Item no. | Dimension | Material | Unit | Price | Delivery time | ||
|---|---|---|---|---|---|---|---|---|
| Post bracket stainless steel A2 90x6x160 mm for 42.4 mm tube | 62576 | A2 / V2A | single | 65,69 EUR per piece | 3 to 5 working days |
Side post mounting: when and how
A railing post can be set on top of a surface or fixed to the side at the edge. Side mounting has two advantages: the walking surface stays clear, and the waterproofing of the balcony or landing is not drilled through.
Our post holder
The post holder A2 has a base plate of 90 × 6 × 160 mm and holds the tube at a wall distance of 40 mm. It is designed for tubes with a diameter of 42.4 mm, material A2 (AISI 304), brushed in grit 240. The wall distance ensures that the post clears plaster, tiles or waterproofing.
Planning and safety
Railings protect against falls and are therefore regulated under building law. In most state building regulations (Landesbauordnungen), residential buildings require railing heights of at least 90 cm, and at fall heights above 12 m at least 110 cm. Openings in railings in residential buildings generally must not be wider than 12 cm, so that children cannot pass through. The exact values are set out in the building regulations of your federal state. Post spacing, anchoring and substrate must be able to absorb the horizontal load; for load-bearing railings, have the fixing specified by a specialist firm or structural engineer.
Substrate and anchoring
In concrete, anchor side post holders with approved heavy-duty or injection anchors made of stainless steel. Observe the edge distance specified by the anchor manufacturer; otherwise the edge will break out on thin slabs and stair treads. In timber, use stainless steel lag screws of sufficient length.
