
Example image
Stainless steel plug 48.3 x 2 flat knurled solid material
- Made in Germany since 2009
- Fast shipping
Description
Stainless steel plug, 1 piece
- Suitable for stainless steel tube 48.3 × 2 mm
- With knurl
- Design: flat
- Solid material, very sturdy
- Surface: finely turned
- Installation: knocked onto the tube
- Manufacture: in Germany
Stainless steel plug: features and applications
A plug closes an open tube end permanently and neatly. It takes the sharpness off the cut edge, keeps dust and water out of the tube and gives handrails, clothes rails and balustrades a finished end. Our plugs are turned from solid material and are knocked into the tube.
Head shape
- flat: flush, calm finish with a clean edge
- domed: slightly rounded, pleasant on handrails and in passageways
- half-round: clearly domed, emphasises the tube end and sits well in the hand
Grip in the tube
A knurl on the shank presses into the inner wall of the tube as the plug is knocked in, while a lamella springs and holds by clamping force. Both hold without adhesive. Outdoors, a drop of epoxy adhesive provides additional sealing.
Special versions
- with M8 thread: for screwing on a ball, a hook or a threaded rod
- with through hole: for rods, ropes or cables that are routed through the tube end
Typical applications
- Ends of handrails and balustrade rails
- Clothes rails projecting beyond the brackets
- Posts, fence tubes and frames made of round tube
- Furniture and shopfitting with stainless steel tube
Knocking in without scratches
Deburr the inside of the tube edge, position the plug straight, place a piece of wood or a folded cloth on top and knock it in with a rubber mallet. A steel hammer used directly on the stainless steel leaves marks.
Fit
This plug fits stainless steel tube 48.3 x 2 mm. It sits in the inside diameter of 44.3 mm (outside diameter minus twice the wall thickness). Check the wall thickness of existing tubes: in a tube with a thinner wall, the plug will sit too loosely.
All versions
| Version | Article number |
|---|---|
| flat, knurled (this page) | S192 |
| domed, knurled | S193 |
| domed, knurled, through hole Ø 12.2 mm | S194 |
| domed, knurled, M8 thread | S195 |
| half-round, knurled | S196 |
Plugs are also available for the tubes 16 x 1 mm, 21.3 x 2 mm, 26.9 x 2 mm, 33.7 x 2 mm, 42.4 x 2 mm, 60.3 x 2 mm; all under Plugs and end caps.
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (limited liability)Country of origin: Germany
Email: info@steel-deal.de