3,76 EUR

Stainless steel plug 33.7 x 2 mm half-round solid material

Item no.:S176
Status:Available, expected to ship from 26.11.2026
Delivery time:3 to 5 working days
3,76 EUR
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Fast shipping

Description

Stainless steel plug, 1 piece

  • Suitable for stainless steel tube 33.7 × 2 mm
  • With knurling
  • Design: half-round
  • Solid material, very sturdy
  • Surface: finely turned
  • Installation: drive onto the tube
  • Manufacture: in Germany

Stainless steel plugs: features and use

A plug closes an open tube end permanently and neatly. It takes the sharpness off the cut edge, keeps dust and water out of the tube and gives handrails, clothes rails and balustrades a finished end. Our plugs are turned from solid material and are driven into the tube.

Head shape

  • flat: flush, calm finish with a clean edge
  • domed: slightly rounded, pleasant on handrails and in passageways
  • half-round: clearly domed, emphasises the tube end and sits well in the hand

Hold in the tube

A knurling on the shank presses into the inner wall of the tube as it is driven in, while a lamella springs and holds by clamping force. Both hold without adhesive. Outdoors, a drop of epoxy adhesive provides additional sealing.

Special versions

  • with M8 thread: for screwing on a ball, a hook or a threaded rod
  • with through hole: for rods, ropes or cables that are routed through the tube end

Typical applications

  • Ends of handrails and balustrade rails
  • Clothes rails projecting beyond the brackets
  • Posts, fence tubes and frames made of round tube
  • Furniture and shop fitting with stainless steel tube

Driving in without scratches

Deburr the inside of the tube edge, position the plug straight, place a piece of wood or a folded cloth on top and drive it in with a rubber mallet. A steel hammer used directly on the stainless steel leaves marks.

Fit

This plug fits stainless steel tube 33.7 x 2 mm. It sits in the internal diameter of 29.7 mm (outer diameter minus twice the wall thickness). With existing tubes, check the wall thickness: in a tube with a thinner wall, the plug will sit too loosely.

All versions

VersionArticle number
flat, lamellaS170
domed, knurledS173
domed, knurled, through hole Ø 12 mmS174
domed, knurled, M8 threadS175
half-round, knurled (this page)S176

Plugs are also available for the tubes 16 x 1 mm, 21.3 x 2 mm, 26.9 x 2 mm, 42.4 x 2 mm, 48.3 x 2 mm, 60.3 x 2 mm; all under Plugs and end caps.

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
E-mail: info@steel-deal.de