
Example image
Stainless steel solid ball V2A Ø40mm ground thread M8
7,08 EUR
incl. 19% VAT plus shipping
- Made in Germany since 2009
- Fast shipping
Description
Accessories
Description
Stainless steel solid ball
- Ø 40 mm
- ground, grit 240
- with blind thread M8
- Material: V2A AISI 304
Also available polished on request, please contact us!
Stainless steel solid ball: properties and uses
The solid ball is turned from solid stainless steel V2A and ground with grit 240. It is heavy, practically indestructible and its surface matches ground tubes, hooks and balustrades.
Bore and fixing
- Thread M6, M8 or M10: for screwing onto a grub screw, double-ended screw, threaded rod or a plug with thread
- Blind hole 10.2 or 12.2 mm: for pushing onto a round bar of 10 or 12 mm and bonding; the bore ends inside the ball, the top remains closed
- Through hole 10.2 or 12.2 mm: for threading onto a bar or rope, for example as a spacer, decorative element or rope stopper
Typical applications
- End piece for coat hooks and clothes hooks, so that hangers do not slip off
- Cap on balustrade posts, stair posts and fence posts
- Handle knob on levers, drawers and furniture
- Decorative ball on gates, letterbox posts and in shopfitting
Installation
On a thread: apply a drop of threadlocker to the thread and screw on hand-tight. On a bar: degrease the bar and the bore and bond with epoxy adhesive. On an open tube, the ball is not fixed directly; for this, first drive in a plug with thread and screw the ball onto it.
Hollow ball or solid ball?
The solid ball is heavier and resistant to impact. For large diameters and post caps where weight is not a factor, a hollow ball is lighter and more economical.
All versions
| Diameter | Bore | Article number |
|---|---|---|
| 15 mm | Thread M6 | 450400 |
| 20 mm | Thread M6 | K12 |
| 25 mm | Through hole Ø 10.2 mm | K26 |
| 25 mm | Through hole Ø 12.2 mm | K27 |
| 25 mm | Thread M6 | K22 |
| 25 mm | Blind hole Ø 10.2 mm | K23 |
| 25 mm | Blind hole Ø 12.2 mm | K24 |
| 30 mm | Through hole Ø 10.2 mm | K36 |
| 30 mm | Through hole Ø 12.2 mm | K37 |
| 30 mm | Thread M6 | K31 |
| 30 mm | Thread M8 | K32 |
| 30 mm | Blind hole Ø 10.2 mm | K33 |
| 30 mm | Blind hole Ø 12.2 mm | K34 |
| 35 mm | Through hole Ø 12.2 mm | K47 |
| 35 mm | Thread M6 | K41 |
| 35 mm | Thread M8 | K42 |
| 35 mm | Blind hole Ø 12.2 mm | K44 |
| 40 mm | Thread M10 | K53 |
| 40 mm | Thread M6 | K51 |
| 40 mm (this page) | Thread M8 | K52 |
| 50 mm | Thread M10 | K72 |
| 50 mm | Thread M8 | K71 |
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
E-mail: info@steel-deal.de