Handrails
Stainless steel handrails for stairs, hallways and outdoor areas: handrail tube in V2A made to measure, handrail brackets with ball ring, end caps and wall connections.





Planning and installing a stainless steel handrail
A handrail provides support and safety on a staircase. It must feel good in the hand, be continuously graspable and sit firmly. Stainless steel V2A is ideal for this: hygienic, corrosion-resistant and long-lasting both indoors and outdoors.
The tube
Our handrail tube is a round tube in V2A (1.4301), ground to grit 240, 33.7 × 2 mm, based on EN ISO 1127. We cut it to your length with ± 2 mm and deburr the ends. For heavily loaded staircases, for example in public buildings, 42.4 mm is also common; you will find matching flanges, rosettes and plugs for it in the accessories.
Easy to grip: diameter and distance
The standard for accessible building (DIN 18040) specifies an easy-grip diameter of 3 to 4.5 cm for handrails, a height of 85 to 90 cm above the front edge of the steps and a clear distance from the wall of at least 5 cm. The 33.7 mm tube sits in the middle of the recommended range. Accessible handrails should also continue horizontally for about 30 cm at the start and end of the staircase. These values are also a good guide for private staircases.
Handrail brackets
Our handrail brackets consist of a disc measuring 70 × 4 mm, a connecting pin with a diameter of 12 mm and a length of 65 mm, and a ball ring with 45 mm for the 33.7 mm tube. They are available as a handrail bracket set and as a handrail bracket for wall mounting. The tube runs through the ball ring and is secured with a grub screw.
Bracket spacing
In practice, handrail brackets are placed about every 100 to 120 cm, plus one bracket near each end. The less load-bearing the wall, the closer the spacing. In plasterboard walls, fix the brackets to the substructure or to timber planks fitted beforehand.
Finishing the ends safely
Open tube ends are a source of injury and can catch on clothing. Close them with a domed plug or a cap, which you can select directly with the handrail tube, or return the end to the wall with a bend.
