
Stainless steel design clothes rail, solid, S-hook selection
max 1650 mm
- Made in Germany since 2009
- Made to measure to order
- Fast shipping
How to determine the order size

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.
Description
Solid design clothes rail with sliding brackets
A stainless steel clothes rail that is fixed to a wall or shelf by means of brackets. The ends project freely beyond the brackets and are finished with a plug, flat or domed as you prefer. Made to measure in our workshop in Germany.
Sliding brackets
Before installation, the brackets can be slid along the tube. This lets you place the fixing points exactly where the wall can bear the load, and avoid cables or tile joints. Equal overhangs on the left and right look the calmest.
Material and finish
Stainless steel V2A, material 1.4301 (AISI 304), ground with grit 240. The brushed, satin-matt grain shows hardly any fingerprints and forgives signs of use. The chromium in the steel forms a protective layer that renews itself after scratches; in living spaces V2A is permanently resistant to rust.
Typical applications
- Hallway wardrobe with S-hooks for bags and hats
- Clothes rail under a shelf or in an open wardrobe
- Shop fitting and display in boutiques
Accessories
Select polished S-hooks above; they are slid onto the rail before installation. Screws 6 × 60 mm and plugs 8 mm can also be selected.
Guide values for planning
- Centre of the rail about 28 to 30 cm in front of the rear wall, so that jackets and coats hang freely
- for long garments, the rail at about 170 to 180 cm above the floor; for shirts and jackets, a hanging height of around 100 cm is sufficient
- at least 5 cm of clearance between the rail and the shelf or ceiling, so that the hangers can be lifted off
Installation and substrate
In concrete and solid brick, expansion anchors hold very well. In perforated brick and aerated concrete, long plugs or injection anchors grip better; in plasterboard, screw into the studs of the substructure or use metal cavity fixings. Drill the hole deeper than the plug length by the plug diameter. You can select stainless steel screws and plugs directly above.
Care
A damp cloth is enough, with a little washing-up liquid if needed; always wipe in the direction of the grain. Avoid chlorine cleaners, scouring agents and steel wool. Fine scratches can be blended in with an abrasive pad in the direction of the grain. More in our care instructions.
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
Email: info@steel-deal.de
Frequently asked questions
Wie messe ich das richtige Bestellmaß für meine Garderobenstange?
Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.
Welchen Durchmesser sollte ich für meine Garderobenstange wählen?
Handelsübliche Kleiderbügel haben Ø 35 mm Innendurchmesser. Wir empfehlen Stangen mit Ø 33,7 mm. So passen Standard-Kleiderbügel passgenau auf.