from 155,01 EUR
TOP

Stainless steel clothes rail made to measure for sloping ceiling

Item no.:GARD1
Status:Made to order
Delivery time:5 to 8 working days
Shape:Sloping ceiling
Diameter:33,7 mm
min 300 mm
max 2390 mm
WallSloping ceiling110 mmØ 33.7 mm
Cross-section across the rail; distance and tube to scale, the rail follows any slope.
In meinem Raum ansehen
Screws:
▾
Ø wall plug:
▾
Calculating price
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Made to measure to order
  • Fast shipping

How to determine the order size

Inside dimension equals order size: tape measure showing the clear width of a cupboard compartment

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.

Description

Clothes rail for sloping roofs, made to measure

Under sloping roofs there is plenty of floor space but little height. This stainless steel clothes rail follows the slope and turns knee-wall spaces, knee walls and attic rooms into a wardrobe. Made to your measurements in our workshop in Germany.

Straight or with a 45° bend

Normally you only order the length (A) of the rail along the slope. Choose length B only if the rail is to be mounted with a 45° bend, for example where it continues at the transition to the vertical wall. For a freely adjustable angle there is the sloping-roof clothes rail with angle.

Measuring correctly

Measure the usable length along the slope at the point where the rail is to be positioned. Check that clothing has enough height beneath the rail: about 100 cm is enough for shirts and jackets, coats need about 150 cm.

Why balls on the rail?

On a sloping rail, clothes hangers slide downwards and collect at the lowest point. Stainless steel balls made of V2A, 15 mm, spaced about 6 cm apart, keep every hanger in its place. As a guide: a rail of 100 cm carries about 16 balls, 120 cm about 19, 150 cm about 25 and 170 cm about 29. For intermediate sizes the number may differ by one or two balls.

Fixing to the slope

The rail is fixed to the sloping roof with wall brackets and runs parallel to the surface at a distance of 11 cm. Up to a length of 120 cm two wall brackets are included, from 120 cm three. The third bracket in the middle halves the free span; because deflection increases with the fourth power of the span, the rail stays straight even when fully loaded.

Material

Round tube 33.7 × 2 mm made of stainless steel V2A (1.4301), ground with grit 240. Balls and brackets are also made of V2A.

Installation under the sloping roof

Sloping roofs usually consist of plasterboard or gypsum fibreboard on a timber or metal substructure. Fix the brackets into the rafters or battens behind the board. A stud finder or a strong magnet will find the rows of screws in the boarding, along which the substructure runs. Where no substructure can be reached, use metal cavity wall anchors.

Care

A damp cloth is sufficient, with a little washing-up liquid if necessary; always wipe in the direction of the grain. Do not use chlorine cleaners, scouring agents or steel wool. Blend fine scratches in with a non-woven abrasive pad in the direction of the grain. More in our care instructions.

You can also plan the clothes rail for sloping roofs with your own measurements in the configurator.

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
E-mail: info@steel-deal.de

Frequently asked questions

Wie messe ich das richtige Bestellmaß für meine Garderobenstange?

Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.

Welchen Durchmesser sollte ich für meine Garderobenstange wählen?

Handelsübliche Kleiderbügel haben Ø 35 mm Innendurchmesser. Wir empfehlen Stangen mit Ø 33,7 mm. So passen Standard-Kleiderbügel passgenau auf.

Wie plane ich die richtige Länge einer Kleiderstange unter der Dachschräge?

Messen Sie das Außenmaß von Wandflansch zu Wandflansch. Das ist Ihr Bestellmaß. Wir fertigen auf Maß, auf den Millimeter genau.

Kann ich die Kleiderstange direkt an einer schrägen Wand oder Schräge befestigen?

Ja. Die Wandhalter funktionieren auch an geneigten Flächen. Entscheidend ist ein tragfähiger Untergrund (Massivwand, Holzbalken oder Ständerwerk).

Welches Material ist am besten für Kleiderstangen unter Dachschrägen geeignet?

V2A Edelstahl ist die beste Wahl: dauerhaft nichtrostend, pflegeleicht, für alle Einbausituationen unter Dachschrägen geeignet.

Wie viele Wandhalter sind bei einer Kleiderstange für Dachschrägen enthalten?

Bis 120 cm: 2 Wandhalter. Ab 120 cm: 3 Wandhalter (inkl. Mittelhalter). Die Anzahl passt sich automatisch an Ihre Länge an.

Kann ich auch eine L-Form oder U-Form für eine Nische unter der Dachschräge nutzen?

Ja. Für Ecknischen eignet sich die L-Form, für größere Nischen die U-Form.

Was tue ich, wenn keine tragfähige Seitenwand unter der Dachschräge vorhanden ist?

Ohne tragfähige Wand: Unsere Kleiderstange für Deckenmontage ist die richtige Wahl. Die Halter werden an der Decke befestigt.