
Stainless steel clothes rail for wall or shelf mounting, brushed
max 1700 mm
- Made in Germany since 2009
- Made to measure to order
- Fast shipping
How to determine the order size

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.
Description
Clothes rail for wall or shelf mounting
A brushed stainless steel clothes rail with brackets for wall, shelf or cupboard. You choose the tube in 26.9 or 33.7 mm; the ends are closed with a flat or domed plug. Made to your measurements in our workshop in Germany.
Which tube diameter?
For normal clothes hangers we recommend 33.7 mm: the hanger hook with an opening of around 35 mm sits steadily on it. The 26.9 mm tube looks more delicate and suits light clothing; under the same load it deflects about twice as much.
Material and surface
Stainless steel V2A, material 1.4301 (AISI 304), ground with grit 240. The brushed, satin-matt grain shows hardly any fingerprints and forgives signs of use. The chromium in the steel forms a protective layer that renews itself after scratches; in living spaces V2A is permanently corrosion-resistant.
Typical applications
- Clothes rail under a shelf in an open wardrobe
- Cloakroom on the wall in the hallway, with S-hooks for bags
- Rail in a built-in cupboard and dressing room
Shelf mounting
For chipboard and MDF, use screws of suitable length; the board should be at least 16 mm thick so that the screw grips sufficiently. Leave at least 5 cm of clearance below the shelf so that the hangers can be lifted off.
Guide values for planning
- Rail centre about 28 to 30 cm in front of the back wall, so that jackets and coats hang freely
- For long clothing, the rail at about 170 to 180 cm above the floor; for shirts and jackets, a hanging height of around 100 cm is sufficient
- At least 5 cm of clearance between the rail and the shelf or ceiling, so that the hangers can be lifted off
Care
A damp cloth is sufficient, with a little washing-up liquid if necessary; always wipe in the direction of the grain. Avoid chlorine cleaners, abrasive cleaners and steel wool. Level out fine scratches with an abrasive fleece in the direction of the grain. More in our care instructions.
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
Email: info@steel-deal.de
Frequently asked questions
Wie messe ich das richtige Bestellmaß für meine Garderobenstange?
Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.
Welchen Durchmesser sollte ich für meine Garderobenstange wählen?
Handelsübliche Kleiderbügel haben Ø 35 mm Innendurchmesser. Wir empfehlen Stangen mit Ø 33,7 mm. So passen Standard-Kleiderbügel passgenau auf.