
Stainless steel clothes rail made from square tube with concealed fixing
max 1700 mm
- Made in Germany since 2009
- Made to measure to order
- Fast shipping
How to determine the order size

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.
Description
Clothes rail made from square tube with concealed fixing
A clothes rail made from stainless steel square tube for installation from wall to wall. The angular profile echoes the lines of tiles, fronts and shelves. Made to your measurements in our workshop in Germany.
Fixing
A wall connector is screwed to each wall, then the rail is fitted and secured. No screw is visible from the front. Both connectors must sit at the same height and exactly opposite each other; mark the height with a spirit level or laser. You select screws 6 × 60 or 8 × 60 mm and wall plugs 8 or 10 mm above.
Square or round?
Clothes hangers slide a little more easily on the round tube, while on the square tube they stay in place. Visually, the square tube suits clear, straight-lined interiors, the round tube classic ones. The round version is available as a clothes rail with wall flange and with concealed fixing.
Material and surface
Stainless steel V2A, material 1.4301 (AISI 304), ground with grit 240. The brushed, silk-matt grain shows hardly any fingerprints and forgives signs of use. The chromium in the steel forms a protective layer that renews itself after scratches; in living spaces, V2A is permanently resistant to rust.
How to measure correctly
The order dimension is the outer dimension: the distance from wall to wall at the height where the rail is to sit, including flanges. Measure at the front and at the back, as niches are rarely exactly parallel, and state the smaller dimension. Tiles, skirting boards and plaster edges must be included in the measurement. We cut the tube so that tube and flanges together give exactly your dimension.
Example: your niche measures 80.3 cm. Then you order 80.3 cm.
Guide values for planning
- Centre of the rail about 28 to 30 cm in front of the back wall, so that jackets and coats hang freely
- for long clothing, the rail at about 170 to 180 cm above the floor; for shirts and jackets, a hanging height of around 100 cm is sufficient
- at least 5 cm of clearance between the rail and the shelf or ceiling, so that the hangers can be lifted off
Installation and substrate
In concrete and solid brick, expansion anchors hold very well. In perforated brick and aerated concrete, long wall plugs or injection anchors grip better; in plasterboard, screw into the studs of the substructure or use metal cavity fixings. Drill the hole deeper than the plug length by the diameter of the plug. You select stainless steel screws and wall plugs directly above.
Care
A damp cloth is enough, with a little washing-up liquid if necessary; always wipe in the direction of the grain. Avoid chlorine cleaners, scouring agents and steel wool. Blend in fine scratches with an abrasive fleece in the direction of the grain. More in our care instructions.
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
Email: info@steel-deal.de
Frequently asked questions
Wie messe ich das richtige Bestellmaß für meine Garderobenstange?
Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.