
Stainless steel clothes rail with concealed fixing
max 1750 mm
- Made in Germany since 2009
- Made to measure to order
- Fast shipping
How to determine the order size

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.
Description
Clothes rail with concealed fixing
A clothes rail from wall to wall with no screw visible from the front. The calm, understated look suits handleless fronts, modern dressing rooms and anywhere the rail should not look like a fitting. Made to your measurements in our workshop in Germany.
How the concealed fixing works
A wall connector is first screwed to each wall. You then place the rail on them and secure it with a grub screw, which you align towards the back or downwards. The fixing screws are hidden; from the front, only the tube and the wall connector can be seen. Select suitable screws 6 × 60 mm or 8 × 80 mm and plugs of 8 or 10 mm above.
Material and finish
V2A stainless steel, material 1.4301 (AISI 304), ground with grit 240. The brushed, satin-matt grain shows hardly any fingerprints and is forgiving of signs of use. The chromium in the steel forms a protective layer that renews itself after scratches; in living spaces, V2A is permanently corrosion-resistant.
What matters during installation
Because the rail is placed onto the wall connectors, both connectors must sit at the same height and exactly opposite each other. Mark the height on both walls with a spirit level or cross-line laser and transfer the drilling points using the connector as a template. Do not tighten the grub screws until the rail is aligned.
How to measure correctly
The ordering dimension is the overall length: the distance from wall to wall at the height where the rail is to sit, including the flanges. Measure at the front and at the back, as niches are rarely exactly parallel, and enter the smaller dimension. Tiles, skirting boards or plaster edges must be included in the measurement. We cut the tube so that tube and flanges together match your dimension exactly.
Example: your niche measures 80.3 cm. Then you order 80.3 cm.
Guide values for planning
- Centre of the rail about 28 to 30 cm in front of the back wall, so that jackets and coats hang freely
- for long garments, the rail at about 170 to 180 cm above the floor; for shirts and jackets, a hanging height of around 100 cm is sufficient
- at least 5 cm of clearance between the rail and the shelf or ceiling, so that the hangers can be lifted off
Installation and substrate
In concrete and solid brick, expansion anchors hold very well. In perforated brick and aerated concrete, long wall plugs or injection anchors grip better; in plasterboard, screw into the studs of the substructure or use metal cavity fixings. Drill the hole deeper than the plug length by the plug diameter. You can select stainless steel screws and plugs directly above.
Prefer visible screws and an installation that forgives small inaccuracies? Then the clothes rail with wall flange is the right choice.
Care
A damp cloth is sufficient, with a little washing-up liquid if needed; always wipe in the direction of the grain. Do not use chlorine-based cleaners, abrasive cleaners or steel wool. Blend fine scratches in with an abrasive fleece in the direction of the grain. More in our care instructions.
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
E-mail: info@steel-deal.de
Frequently asked questions
Wie messe ich das richtige Bestellmaß für meine Garderobenstange?
Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.
Welchen Durchmesser sollte ich für meine Garderobenstange wählen?
Handelsübliche Kleiderbügel haben Ø 35 mm Innendurchmesser. Wir empfehlen Stangen mit Ø 33,7 mm. So passen Standard-Kleiderbügel passgenau auf.