from 82,54 EUR
TOP

Stainless steel clothes rail, L-shape, curved, round

Item no.:GLB50
Status:Made to order
Delivery time:5 to 8 working days
min 200 mm
max 1700 mm
min 100 mm
max 800 mm
Screws:
▾
Ø wall plug:
▾
S-hooks:
▾
82,54 EUR
Base price: 275,13 EUR per linear metre
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Made to measure to order
  • Fast shipping

How to determine the order size

Inside dimension equals order size: tape measure showing the clear width of a cupboard compartment

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.

Description

L-shape, bent with a soft radius

The rounded sister of our L-shape: the stainless steel tube is bent at a 90° angle, the transition is soft and there is no weld seam in the corner. This looks fluid and homely and suits interiors with rounded forms. For room corners and open wardrobe sides, made to your measurements: mounted in a corner between two walls or on one wall and, for example, a shelf.

Clothes hangers

The hook of a standard clothes hanger has an opening of around 35 mm inside. On the tube with 33.7 mm it therefore sits steadily without tipping, yet still slides easily.

Prefer a sharply defined corner? Then choose the angular L-shape.

Length and depth

  • Length (A): the long leg on which the clothes hang. Allow roughly 3 cm per shirt, 5 cm per jacket and 8 to 10 cm per winter coat.
  • Depth (B): the short leg towards the wall. For clothes hangers, a depth of about 30 cm is ideal, so that even wide jackets hang freely.
  • The dimensions (A) and (B) refer to the tube; the anchor plate and cover rosette add about 2 cm on each mounting side.

Left, right, horizontal, vertical

The L-shape can be used as a mirror image: left or right, on the wall or hanging from the ceiling. With the bracket between ceiling and shelf you connect a shelf to the ceiling and the rail below it; this creates a particularly rigid dressing room.

Fixing

The ends have anchor plates, which are fixed with stainless steel screws 6 × 60 mm and wall plugs. Cover rosettes hide the screws; secure them after installation with a little silicone or hot glue. Because the L-shape creates a leverage effect at the wall connection, this point belongs in a load-bearing substrate: concrete, solid brick or a sturdy shelf.

Material and surface

Stainless steel V2A, material 1.4301 (AISI 304), ground with grit 240. The brushed, satin matt grain shows hardly any fingerprints and forgives signs of use. The chromium in the steel forms a protective layer that renews itself after scratches; in living spaces, V2A is permanently corrosion-resistant.

Care

A damp cloth is sufficient, with a little washing-up liquid if necessary; always wipe in the direction of the grain. Avoid chlorine cleaners, abrasives and steel wool. Fine scratches can be blended in with an abrasive fleece in the direction of the grain. More in our care instructions.

The configurator also calculates all dimensions and prices. For unusual installation situations, send us a sketch.

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
E-mail: info@steel-deal.de

Frequently asked questions

Wie messe ich das richtige Bestellmaß für meine Garderobenstange?

Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.

Welchen Durchmesser sollte ich für meine Garderobenstange wählen?

Handelsübliche Kleiderbügel haben Ø 35 mm Innendurchmesser. Wir empfehlen Stangen mit Ø 33,7 mm. So passen Standard-Kleiderbügel passgenau auf.