
Stainless steel clothes rail, L-shape, angular
max 1990 mm
max 1000 mm
- Made in Germany since 2009
- Made to measure to order
- Fast shipping
How to determine the order size

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.
Description
L-shape angular 90°, welded made to measure
For room corners and open cupboard sides: the L-shape is mounted in a corner between two walls or on one wall and, for example, a shelf. Two stainless steel tubes are welded at a right angle and the seam is neatly ground flush. The sharply defined corner looks architectural and clear. We make both legs to your measurements; the L-shape thus replaces many a space-hogging wardrobe.
Tube diameter
You choose 21.3, 26.9 or 33.7 mm. For coat hangers we recommend 33.7 mm, because the hanger hook, with an opening of around 35 mm, sits steadily on it. The thick tube is also about four times as rigid as the thinnest.
Length and depth
- Length (A): the long leg on which the clothing hangs. Allow roughly 3 cm per shirt, 5 cm per jacket and 8 to 10 cm per winter coat.
- Depth (B): the short leg towards the wall. For coat hangers a depth of about 30 cm is ideal, so that even wide jackets hang freely.
- The dimensions (A) and (B) refer to the tube; the anchor plate and cover rosette add about 2 cm on each fixing side.
Left, right, horizontal, vertical
The L-shape can be used as a mirror image: left or right, on the wall or hanging from the ceiling. With the bracket between ceiling and shelf you connect a shelf to the ceiling and the rail below it; this creates a particularly rigid dressing area.
Fixing
The ends carry anchor plates, which are fixed with stainless steel screws 6 × 60 mm and plugs. Cover rosettes conceal the screws; secure them after installation with a little silicone or hot glue. Because the L-shape generates a leverage effect at the wall connection, this point belongs in a load-bearing substrate: concrete, solid brick or a solid shelf.
Material and finish
Stainless steel V2A, material 1.4301 (AISI 304), ground with grit 240. The brushed, satin-matt grain shows hardly any fingerprints and forgives signs of use. The chromium in the steel forms a protective layer that renews itself after scratches; in living spaces V2A is permanently resistant to rust.
Care
A damp cloth is sufficient, with a little washing-up liquid if needed; always wipe in the direction of the grain. Avoid chlorine-based cleaners, scouring agents and steel wool. Blend fine scratches with an abrasive fleece in the direction of the grain. More in our care instructions.
All dimensions and prices are also calculated by the configurator. For unusual installation situations, send us a sketch.
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
E-mail: info@steel-deal.de
Frequently asked questions
Wie messe ich das richtige Bestellmaß für meine Garderobenstange?
Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.
Wie plane ich die Schenkellängen meiner L-Form-Garderobenstange?
Messen Sie Länge A und Tiefe B separat als Außenmaß (inkl. Flansche) und geben Sie beide im Konfigurator ein.
Wie ist die 90°-Ecke bei einer L-Form-Garderobenstange ausgeführt?
Die Ecke ist eckig und im 90°-Winkel gefertigt, ohne Bogen. Präzise, stabil und sauber im Erscheinungsbild.
Für welche Einbausituationen ist die L-Form-Garderobenstange am besten geeignet?
Die L-Form ist ideal für Raumecken, Ecknischen, offene Garderoben und Einbauschränke, überall dort, wo zwei Seiten bespannt werden sollen.
Wie unterscheidet sich die L-Form von der U-Form bei Garderobenstangen?
L-Form = 2 Schenkel, 1 Ecke (für Raumecken). U-Form = 3 Schenkel, 2 Ecken (für Nischen und Walk-in-Closets).
Wie stabil ist eine L-Form-Garderobenstange aus V2A Edelstahl?
Sehr stabil: V2A Edelstahl Ø 33,7 × 2 mm, trägt 30 bis 40 kg pro Schenkel. Bei Längen über 150 cm empfehlen wir einen Mittelhalter.
Kann ich die L-Form auch unter einer Dachschräge einsetzen?
Ja, für Ecknischen unter der Dachschräge ist die L-Form geeignet. Für gerade Nischen empfiehlt sich die Dachschrägen-Kleiderstange.