from 35,13 EUR
TOP

Stainless steel coat hook, clothes hook incl. solid ball 20 mm made to measure

Item no.:KB85
Status:Made to order
Delivery time:3 to 5 working days
min 100 mm
max 500 mm
Tube end:
▾
Number of balls 20 mm:
▾
Ø wall plug:
▾
Screws:
▾
35,13 EUR
Base price: 351,30 EUR per linear metre
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Made to measure to order
  • Fast shipping

How to determine the order size

Inside dimension equals order size: tape measure showing the clear width of a cupboard compartment

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.

Description

Coat hook with solid ball, made to measure

A coat hook made of stainless steel tube 33.7 × 2 mm, projecting at right angles from the wall. Clothes hangers are slipped onto it, and one to three solid balls of 20 mm hold them back and divide the hook into sections. This creates space for several jackets and coats on very little wall width. You choose the length yourself; made in our workshop in Germany.

Construction

  • Stainless steel tube 33.7 × 2 mm, V2A, ground to grit 240
  • one, two or three solid balls 20 mm, V2A ground
  • Stainless steel round plate 70 × 4 mm with four 6.5 mm holes, welded to the tube
  • Cover rosette 76 mm, bore 33.9 mm, ground to grit 240
  • Screws and wall plugs of your choice

The first ball sits 1 cm from the end of the tube, and each further ball at the same spacing. The welded mounting plate makes the hook very rigid.

Clothes hangers

The hook of a standard clothes hanger has an inner opening of around 35 mm. On the 33.7 mm tube it therefore sits steadily without tilting, and still slides easily.

Choosing the length

Allow about 5 to 8 cm per hanger with a jacket, and up to 10 cm for winter coats. A hook with a length of 30 cm therefore holds three to six jackets. Bear in mind the leverage: the longer the hook, the greater the force on the upper screws. Long hooks should therefore be fixed into concrete or solid brick.

Installation

Fasten the mounting plate to the wall with four screws, then slide the cover rosette against the wall and secure it with a little silicone or hot glue. For jackets and coats, mount the hook at a height of about 160 to 180 cm; with several hooks side by side, leave a spacing of 15 to 25 cm.

Variants

Instead of balls, the hook is also available with a cap or a pin as a hanger stop, and with the cap also with wood in nine wood species.

Care

A damp cloth is sufficient, with a little washing-up liquid if needed; always wipe in the direction of the grain. Do not use chlorine-based cleaners, abrasive agents or steel wool. Fine scratches can be blended in with an abrasive fleece in the direction of the grain. More in our care instructions.

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
Email: info@steel-deal.de

Frequently asked questions

Wie messe ich das richtige Bestellmaß für meine Garderobenstange?

Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.

Welchen Durchmesser sollte ich für meine Garderobenstange wählen?

Handelsübliche Kleiderbügel haben Ø 35 mm Innendurchmesser. Wir empfehlen Stangen mit Ø 33,7 mm. So passen Standard-Kleiderbügel passgenau auf.