Tools
This category contains stainless steel bits with 1/4-inch drive individually and as a set, a magnetic bit holder, a TX45 Pin bit, shackle keys, universal deck keys and cap keys, Tenax keys, a hydraulic crimping tool with crimping dies, wire rope cutters with spare parts, as well as polishing pads, sanding discs and a replacement battery for the polishing and sanding machine.

















Tools for stainless steel, wire rope and canvas covers
Fastening stainless steel with stainless steel
Contamination rust on stainless steel can result from abrasion when fastening with conventional steel tools: firmly adhering steel particles remain behind and rust. Tools that have previously been used on ordinary steel can also transfer steel particles. The bits, the bit set and the magnetic bit holder are therefore made of A2 stainless steel. Individual bits are available with various profiles, which are stated for each version, each individually or in the packaging unit. The TX45 Pin bit is not made of stainless steel; when fastening stainless steel, the note on contamination rust applies to it.
Crimping and cutting wire rope
The hydraulic crimping tool crimps terminals and crimp clamps onto wire ropes. The crimping dies are each assigned to a terminal diameter or rope diameter, so select the die to suit the terminal or clamp. Wire rope cutters cut stainless steel ropes cleanly without the rope fraying. Spare parts are available for the large cutters. Terminals and further rope tools can be found under Stainless steel terminals and Wire rope tools.
Keys for on board and canvas covers
Shackle keys open and close shackle pins; the stamped key additionally has open-ended spanners. The universal deck key combines, among other things, a shackle opener, cap opener, bottle opener, screwdriver and spanner sizes 8 and 11 mm. The Tenax keys are used to fasten the top and bottom parts of Tenax fasteners: punch a hole in the fabric, insert the bottom part from below, screw the serrated washer on loosely from above and tighten the bottom part from below with the key. The fasteners are listed under Tenax locking fastener.
Polishing
For the polishing machine there are hook-and-loop discs as polishing pads made of terry cloth, lambskin and sponge, as well as sanding discs in grits 80, 120 and 180. Smooth surfaces resist corrosion better than rough ones, and a mirror polish is the most durable mechanical finish.
