Tools

Tools

This category contains stainless steel bits with 1/4-inch drive individually and as a set, a magnetic bit holder, a TX45 Pin bit, shackle keys, universal deck keys and cap keys, Tenax keys, a hydraulic crimping tool with crimping dies, wire rope cutters with spare parts, as well as polishing pads, sanding discs and a replacement battery for the polishing and sanding machine.

Items 1 to 17 of 17
ImageDescriptionItem no.DimensionMaterialUnitPriceDelivery timeBuy
Drilling jig for wooden handrailCN5500270single15,32 EUR per piece3 to 5 working days
Stainless steel bit set 1/4" 18-piece, stainless steel A2814734218Length 114 mm, Width 53 mmA2 / V2Asingle82,86 EUR per piece3 to 5 working days
Replacement battery for polishing and sanding machine, 2.0 Ah8148313AKKU20single45,40 EUR per piece3 to 5 working days
Hook-and-loop disc for polishing machine7 versionsfrom 0,52 EUR per piece3 to 5 working daysAll versions
Stainless steel magnetic bit holder 1/4", stainless steel A2814999214A2 / V2Asingle24,65 EUR per piece3 to 5 working days
Stainless steel bit 1/4", stainless steel A223 versionsfrom 1,96 EUR per piece3 to 5 working daysAll versions
Universal deck key, stainless steel A48151494Material diameter 3,5 mmA4 / V4APackaging unit: 5 pieces4,32 EUR per piece1 PU = 21,60 EUR3 to 5 working days
Bit 1/4", CRV TX45 Pin81521310TX45PINA2 / V2Asingle2,91 EUR per piece3 to 5 working days
Tenax key made of sheet steel, 32 mm, AF9, nickel-plated steel815097210Length 32 mmStahl vernickeltPackaging unit: 10 pieces0,9030 EUR per piece1 PU = 9,03 EUR3 to 5 working days
Tenax key with wooden handle, 140 mm, nickel-plated steel81600310140Length 140 mmStahl / Holzsingle39,25 EUR per piece3 to 5 working days
Universal deck key, 98 x 70 mm, stainless steel A2815087298Length 98 mm, Width 70 mmA2 / V2APackaging unit: 5 pieces4,58 EUR per piece1 PU = 22,89 EUR3 to 5 working days
Shackle key, stamped, 100 mm, with open-ended spanner 8, 10 and 13 mm, stainless steel A283062100LInner diameter 5 mm, Length 100 mmA2 / V2APackaging unit: 5 pieces3,72 EUR per piece1 PU = 18,61 EUR3 to 5 working days
Shackle key, cast, 86 mm, stainless steel A48977405Inner diameter 7 mm, Length 86 mmA4 / V4APackaging unit: 10 pieces1,67 EUR per piece1 PU = 16,67 EUR3 to 5 working days
Hydraulic crimping tool 7t, 480 mm, in plastic case, steel8146781012Length 480 mmStahlsingle290,71 EUR per piece3 to 5 working days
Crimping jaws for terminals, steel6 versionsfrom 203,50 EUR per piece3 to 5 working daysAll versions
Crimping jaws for oval crimp clamps, steel5 versionsfrom 226,06 EUR per piece3 to 5 working daysAll versions
Wire rope cutter, steel5 versionsfrom 41,43 EUR per piece3 to 5 working daysAll versions

Tools for stainless steel, wire rope and canvas covers

Fastening stainless steel with stainless steel

Contamination rust on stainless steel can result from abrasion when fastening with conventional steel tools: firmly adhering steel particles remain behind and rust. Tools that have previously been used on ordinary steel can also transfer steel particles. The bits, the bit set and the magnetic bit holder are therefore made of A2 stainless steel. Individual bits are available with various profiles, which are stated for each version, each individually or in the packaging unit. The TX45 Pin bit is not made of stainless steel; when fastening stainless steel, the note on contamination rust applies to it.

Crimping and cutting wire rope

The hydraulic crimping tool crimps terminals and crimp clamps onto wire ropes. The crimping dies are each assigned to a terminal diameter or rope diameter, so select the die to suit the terminal or clamp. Wire rope cutters cut stainless steel ropes cleanly without the rope fraying. Spare parts are available for the large cutters. Terminals and further rope tools can be found under Stainless steel terminals and Wire rope tools.

Keys for on board and canvas covers

Shackle keys open and close shackle pins; the stamped key additionally has open-ended spanners. The universal deck key combines, among other things, a shackle opener, cap opener, bottle opener, screwdriver and spanner sizes 8 and 11 mm. The Tenax keys are used to fasten the top and bottom parts of Tenax fasteners: punch a hole in the fabric, insert the bottom part from below, screw the serrated washer on loosely from above and tighten the bottom part from below with the key. The fasteners are listed under Tenax locking fastener.

Polishing

For the polishing machine there are hook-and-loop discs as polishing pads made of terry cloth, lambskin and sponge, as well as sanding discs in grits 80, 120 and 180. Smooth surfaces resist corrosion better than rough ones, and a mirror polish is the most durable mechanical finish.