Tools, Repair & Care

Items 25 to 29 of 29
ImageDescriptionItem no.DimensionMaterialUnitPriceDelivery timeBuy
Shackle key, cast, 86 mm, stainless steel A48977405Inner diameter 7 mm, Length 86 mmA4 / V4APackaging unit: 10 pieces1,67 EUR per piece1 PU = 16,67 EUR3 to 5 working days
Hydraulic crimping tool 7t, 480 mm, in plastic case, steel8146781012Length 480 mmStahlsingle290,71 EUR per piece3 to 5 working days
Crimping jaws for terminals, steel6 versionsfrom 203,50 EUR per piece3 to 5 working daysAll versions
Crimping jaws for oval crimp clamps, steel5 versionsfrom 226,06 EUR per piece3 to 5 working daysAll versions
Wire rope cutter, steel5 versionsfrom 41,43 EUR per piece3 to 5 working daysAll versions

This category contains tools for installation and maintenance on board and products for repair and care: stainless steel bits and bit holders, shackle keys, deck keys and lid keys, Tenax keys, a hydraulic crimping tool with crimping dies, wire rope cutters, polishing pads, as well as Tef-Gel, the ResQ-tape repair tape and the ResQ-plast plaster.

Tools, repair and care for stainless steel on board

The subcategories at a glance

  • Tools: stainless steel bits, keys for shackles, deck and Tenax, crimping tool, wire rope cutters and polishing accessories.
  • Repair and care: Tef-Gel against contact corrosion and seizing, ResQ-tape for emergency repairs and ResQ-plast as a plaster.

Avoiding contamination rust

Contamination rust can occur when stainless steel screws are tightened with conventional steel tools: the abrasion leaves steel particles behind, which rust. Bits and bit holders made of stainless steel avoid this cause. Tools that have previously been used on ordinary steel, and steel dust from grinding or cutting nearby, also deposit steel particles on the stainless steel, where they rust.

Keys and wire rope tools

Shackle keys open and close shackle pins. The universal deck key combines, among other things, a shackle opener, lid opener and bottle opener. Tenax keys fasten the upper and lower parts of Tenax fasteners. The hydraulic crimping tool, with the matching die, crimps terminals and crimp sleeves onto wire ropes, and the wire rope cutter cuts stainless steel ropes without fraying them.

Protecting threads and joints

Stainless steel threads tend to seize when tightened. According to the manufacturer, Tef-Gel forms a PTFE layer in the thread that prevents this, and keeps salt water out of the joint between different metals. It does not electrically insulate the components. For emergency repairs to hoses and lines, the self-fusing silicone tape ResQ-tape is used.

Care

Stainless steel only corrodes when enough chlorides, for example from salt water, lie on the surface and water does not wash them away. Rinse off salt regularly with fresh water. Household cleaners are unsuitable because some contain chlorides or bleach. Smooth, polished surfaces resist corrosion better than rough ones. For the polishing machine there are polishing pads made of terry cloth, lambswool and sponge, as well as sanding discs. You will find more in the guide Caring for stainless steel on the boat.