Rub rails

Rub rails

This category contains rub rails in stainless steel A4 as flat solid section, as half-round solid section and as half-round hollow section, polished or polished and drilled, each as lengths. There are also half-round scratch guards in hollow and solid versions as short pieces. They protect the hull and edges from scratches and knocks.

Items 1 to 5 of 5
ImageDescriptionItem no.DimensionMaterialUnitPriceDelivery timeBuy
Rub rail, flat, solid, stainless steel A44 versionsfrom 169,18 EUR per piece3 to 5 working daysAll versions
14 mm, poliert und gebohrt, A4, Stange 3 m814100414PGLength 3000 mm, Width 14 mmA4 / V4Asingle248,55 EUR per piece3 to 5 working days
14 mm, poliert, A4, Stange 3 m814100414PLength 3000 mm, Width 14 mmA4 / V4Asingle169,18 EUR per piece3 to 5 working days
20 mm, poliert und gebohrt, A4, Stange 3 m814100420PGLength 3000 mm, Width 20 mmA4 / V4Asingle278,82 EUR per piece3 to 5 working days
20 mm, poliert, A4, Stange 3 m814100420PLength 3000 mm, Width 20 mmA4 / V4Asingle202,53 EUR per piece3 to 5 working days
Rub rail, half-round, hollow, polished and drilled, stainless steel A45 versionsfrom 108,64 EUR per piece3 to 5 working daysAll versions
Rubbing strip half-round, solid, stainless steel A411 versionsfrom 58,35 EUR per piece3 to 5 working daysAll versions
Scratch guard, half-round and hollow, stainless steel A48 versionsfrom 7,18 EUR per piece3 to 5 working daysAll versions
Scratch guard half-round and solid, stainless steel A45 versionsfrom 5,53 EUR per piece3 to 5 working daysAll versions

Rub rails and scratch guards in stainless steel A4

Choosing the section

We supply rub rails as lengths and scratch guards as short pieces in fixed lengths, the scratch guard individually or in the packaging unit. Width, height and length are given for each version.

Drilled or undrilled

Many lengths are available polished and drilled or polished only. Fix the rail with screws in A4, so that rail and screw are made of the same material and no contact corrosion occurs. You will find suitable screws under Stainless steel screws. Sealant under the screw heads keeps water out of the drill holes.

Care

Smooth surfaces are more resistant to corrosion than rough ones, and a mirror polish is the most resistant mechanical finish. Salt left lying on the rail attracts moisture and can trigger corrosion. Rinse it off regularly with fresh water. Household cleaners are unsuitable because some contain chlorides or bleach. Steel dust from grinding nearby and tools previously used on ordinary steel can transfer steel particles to the rail, which then rust there. You will find polishing pads under Tools, and more on care in the guide Caring for stainless steel on your boat.