Guardrail fittings
This category contains guardrail bases with round, rectangular or triangular base plate, weld-on bases, guardrail stanchions and gate stanchions, T-pieces, corner connectors and guardrail connectors for 22 and 25 mm tube, assembly sets for the guardrail wire, fairleads, fender eyes, eye brackets, screw connectors and strap fittings, as well as holders for canvas, bungee cord and rope, and plastic hooks and cleats for the guardrail. Most items are made of stainless steel A4.
























Guardrail fittings: bases, connectors, fairleads and strap fittings
Tube size and angle
Connectors and bases are mostly made for 22 or 25 mm tube. The size is stated for each version; the guardrail stanchions have an outer diameter of 25 mm. Guardrail bases are available with 90°, 60° and 30° as well as with triangular plate and 3° or 5°; the angle is stated in the article name. The T-piece with 60° is available left, right and universal.
Fitting bases correctly
Incorrectly fitted guardrail bases are a common cause of hairline cracks in the gelcoat. Apply sealant under the base and screw heads and tighten the nut. In a damp environment, do not connect stainless steel directly to aluminium or galvanised steel, otherwise contact corrosion is a risk.
Guardrail wire
The assembly sets with eye and fork are designed for 4 mm wire rope with white coating. For regattas under the Offshore Special Regulations of World Sailing, guardrail wires of stainless steel must be uncoated and without a close-fitting sleeve; these coated sets are not suitable for that purpose. The matching rope is listed under Stainless steel wire ropes.
Fairleads, fender eyes and strap fittings
The reefing line fairleads from Wichard are available for guardrail stanchions with 25 mm diameter and with M10 deck screw for deck mounting, each for rope up to 18 mm. The guide eye from Wichard for deck mounting is forged from duplex stainless steel. The fairlead from Allen is made of plastic with stainless steel reinforcement and is designed for rope up to 14 mm. The shroud cleats from Barton are fitted on wire rope 4 to 8 mm. Strap hooks, strap buckles, ratchet straps, webbing brackets and clamp lock tension and hold straps for batteries, tanks and cargo. Choose them according to the strap width, which is stated for each version. Where the manufacturer specifies a breaking load, it is likewise stated.
Material
Some strap fittings and fender eyes are available in A2. A2 is resistant indoors, in the weather and in fresh water; in salt water and salt-laden air it can show surface rust and pitting corrosion. A4 is alloyed with molybdenum and is considerably more resistant, but is likewise not suitable for every marine environment. More in the article V2A, V4A or duplex on the boat.
