Hooks & Holders

Hooks & Holders

This category contains flagstaff holders in stainless steel A4 for the stern, for surface mounting and in recessed versions, each with angle and maximum tube diameter. It also includes the hatch spring holder in stainless steel A2 in several lengths.

Items 1 to 3 of 3
ImageDescriptionItem no.DimensionMaterialUnitPriceDelivery timeBuy
Hatch spring holder, stainless steel A22 versionsfrom 9,89 EUR per piece3 to 5 working daysAll versions
235 mm, A2, 1 Stück84722235Diameter 10 mm, Length 235 mmA2 / V2Asingle9,89 EUR per piece3 to 5 working days
295 mm, A2, 1 Stück84722295Diameter 15 mm, Length 295 mmA2 / V2Asingle17,09 EUR per piece3 to 5 working days
Flagstaff holder, 80°, 65 mm, for tube max. 26 mm, stainless steel A48586426Diameter 65 mm, Inner diameter 26 mmA4 / V4Asingle61,25 EUR per piece3 to 5 working days
Flagstaff holder recessed, 60°, 70 mm, for tube max. 32 mm, stainless steel A48587470Diameter 71 mm, Inner diameter 32 mmA4 / V4Asingle20,59 EUR per piece3 to 5 working days

Flagstaff holders and hatch spring holders

Choosing a flagstaff holder

The national flag should fly clearly visible from an inclined staff on the centreline at the stern. If this is not possible structurally, the staff may be offset to starboard. Choose the holder according to the outer diameter of your flagstaff; the maximum suitable tube diameter is stated for each holder. The angle is stated in the article name.

Material

The flagstaff holders are made of stainless steel A4, which is considerably more resistant than A2 thanks to molybdenum. The hatch spring holder is made of A2. In fresh water and on inland waters A2 is resistant; in salt water and salt-laden air it can show surface rust and pitting corrosion. A4 is likewise not suitable for every marine environment; background in the article V2A, V4A or duplex on the boat.

Installation

Use screws made of the same material as the holder so that no contact corrosion occurs. You will find matching A4 screws under Stainless steel screws. Apply sealant under the holder and screw heads so that no water penetrates the deck. Further holders for guardrail and strap are listed under Guardrail fittings.