Handles & Handrails
This category includes handrails with internal thread, with external thread and with base plates, as well as handrail brackets, handrail pass-throughs and handrail end pieces for 22 and 25 mm tube, sprayhood handrail brackets for the sprayhood frame, grab handle connectors and grub screws to ISO 4027. Almost all items are made of stainless steel A4, some handrails and connectors of A2.
























Handrails and handrail brackets: selection and installation
Fixed handrails
Handrails with M6 internal thread are fastened with M6 screws. Handrails with external thread have a 5/16 UNC inch thread, and the version Art. 8442 is supplied with washer and nut. Handrails with base plates are also available. Length and thread are stated for each version. Apply sealant under the feet and under the screw heads so that no water penetrates the deck or superstructure. On handrails with external thread, tighten the nut so that the sealant is not twisted out.
Handrail on sprayhood and bimini
Sprayhood handrail brackets, tube supports, centre pieces and end pieces connect a handrail to the tube frame of a sprayhood, bimini or cockpit enclosure. They are designed for 22 or 25 mm tube. We supply the handrail end pieces for sprayhood, cockpit enclosure and bimini as a set with tube support, retaining ring, grub screw, rubberised washer and German assembly instructions. Grub screws clamp such brackets onto the tube. Grub screws to ISO 4027 are grub screws with hexagon socket and point. You will find the matching stainless steel tube under Tubes and fittings, and accessories for covers and canvas under Bimini and canvas covers.
Pass-throughs, end pieces and connectors
Handrail pass-throughs and handrail end pieces are available with inclinations of 60°, 90° and 8° and with M8 thread. The axis height is stated for each version. For the handrail end piece 60° with the article number 8208422, the manufacturer states that the tube must be cut at an angle of 60° so that the full insertion depth is achieved. Grab handle connectors are available as solid versions or as a double clamp, each for 22 or 25 mm tube.
Material
The handrails with external thread and the Ø 25 mm handrail with internal thread are made of A2. A2 is resistant indoors, in the weather and in fresh water; in salt water and salt-laden air it can show surface rust and pitting corrosion. A4 is alloyed with molybdenum and is considerably more resistant, but is likewise not suitable for every marine environment. Near salt water, therefore, choose a handrail made of A4. More in the article V2A, V4A or duplex on the boat.
