Deck & Mast Plates
Here you will find eye plates and deck plates in round, oval, rectangular and diamond shapes, mast plates, folding eyes, hook plates, eye plates with swivel, base plates with swivel shackle, round shackle or ring nut, mounting plates with tab, U-bolts, fairlead eyes and canopy fittings with eye. They create fixed anchor points on deck and mast for blocks, shackles and lines, in stainless steel A2, A4 and duplex.
























Choosing and fitting eye plates and folding eyes
Designs
Deck plates and eye plates have a fixed loop. Versions with ring also have a movable ring, and eye plates with thread have a thread, the size of which is stated for each version. Eye plates with swivel or swivel eye have a rotating eye. Mast plates are available oval, diamond-shaped and domed with a vertical or horizontal loop. Folding eyes have a folding D-ring or loop; the folding eyes from Wichard are forged from stainless steel A4. We supply the U-bolts with nuts and backing plate.
Material: A2, A4 or duplex
Some plates are available in either A2 or A4. Oval and domed mast plates, the diamond mast plate with ring, the folding eye Art. 8579, eye plates with thread and the rectangular eye plates with swivel eye are only available in A2. A2 is resistant indoors, in the open air and in fresh water, but in salt water and salty air it can show surface rust and pitting corrosion. A4 is alloyed with molybdenum and is considerably more resistant, but is likewise not suitable for every marine environment. Near salt water, therefore, choose a design in A4, for example the diamond mast plate without ring. The diamond-shaped deck plate is also available in duplex stainless steel; background in the article V2A, V4A or duplex on the boat. Dimensions, material and, where stated, the breaking load are given for each version.
Sealing
The double folding eye with counter plate comes with its backing plate. Apply sealant under the plate and the screw heads, and tighten at the nut so that the seal is not twisted out. Which shackle suits the plate is shown in the guide Choosing shackles and snap hooks correctly.
On the aluminium mast
In damp conditions, stainless steel on aluminium forms a pair in which the less noble metal is attacked. Separating the contact surfaces, for example with plastic or rubber, prevents this. According to the manufacturer, Tef-Gel keeps salt water out of the joint between stainless steel and aluminium; it can be found under Repair and care.
