Cleats & Bollards

Cleats & Bollards

Cleats made of A4 stainless steel for making fast mooring lines and ropes: flat, arched or with a hump, with holes, internal or external thread, folding and recessed, as lip cleat, fairlead, flag cleat, fender cleat and emergency cleat. Also bollards, cross bollards and horn bollards, a wire rope cleat and plastic cleats.

Items 25 to 33 of 33
ImageDescriptionItem no.DimensionMaterialUnitPriceDelivery timeBuy
Double cross bollard, 170 x 60 x 85 mm, stainless steel A488864150 60Length 170 mm, Width 60 mmA4 / V4Asingle218,58 EUR per piece3 to 5 working days
Flag cleat, Art. 8973, stainless steel A43 versionsfrom 1,20 EUR per piece3 to 5 working daysAll versions
68 mm, A4, VE 10 Stück89734068Length 68 mmA4 / V4APackaging unit: 10 pieces1,20 EUR per piece1 PU = 11,97 EUR3 to 5 working days
114 mm, A4, VE 10 Stück89734114Length 114 mmA4 / V4APackaging unit: 10 pieces1,53 EUR per piece1 PU = 15,29 EUR3 to 5 working days
150 mm, A4, VE 10 Stück89734150Length 150 mmA4 / V4APackaging unit: 10 pieces2,87 EUR per piece1 PU = 28,65 EUR3 to 5 working days
Flat cleat, 4 holes, heavy-duty version, stainless steel A42 versionsfrom 159,99 EUR per piece3 to 5 working daysAll versions
ca. 300 mmKLF300-SLength ca. 300 mmA4 / V4Asingle159,99 EUR per piece3 to 5 working days
ca. 380 mmKLF380-SLength ca. 380 mmA4 / V4Asingle229,99 EUR per piece3 to 5 working days
Flat cleat with 2 holes, approx. 150 mm, stainless steel A4KL2F150Length ca. 150 mmA4 / V4Asingle12,59 EUR per piece3 to 5 working days
Retractable cleat 160 mm, stainless steel A4KLVER160Length 153 mmA4 / V4Asingle79,99 EUR per piece3 to 5 working days
Folding cleat with 2 holes, stainless steel A43 versionsfrom 51,99 EUR per piece3 to 5 working daysAll versions
117 mmKLKL-2B117Length 117 mmA4 / V4Asingle51,99 EUR per piece3 to 5 working days
175 mmKLKL-2B175Length 175 mmA4 / V4Asingle95,99 EUR per piece3 to 5 working days
210 mmKLKL-2B210Length 210 mmA4 / V4Asingle149,99 EUR per piece3 to 5 working days
Folding cleat with 2 bolts, stainless steel A43 versionsfrom 52,99 EUR per piece3 to 5 working daysAll versions
117 mmKLKL-2S117Thread 1/4", Length 117 mmA4 / V4Asingle52,99 EUR per piece3 to 5 working days
175 mmKLKL-2S175Thread 5/16", Length 175 mmA4 / V4Asingle95,99 EUR per piece3 to 5 working days
210 mmKLKL-2S210Thread 3/8", Length 210 mmA4 / V4Asingle149,99 EUR per piece3 to 5 working days
Plastic cleat, black, with 2 holes5 versionsfrom 1,99 EUR per piece3 to 5 working daysAll versions
Plastic cleat, white, with 2 holes5 versionsfrom 1,79 EUR per piece3 to 5 working daysAll versions

Choosing and fitting cleats and bollards

The right size

Manufacturers recommend just under one inch of cleat length for every sixteenth of an inch of line diameter: a line of around 10 mm suits a cleat of about 15 cm, and one of around 13 mm suits a cleat of about 20 cm. Larger cleats and cleats with smooth, rounded horns are kinder to the line, since sharp edges and tight bends weaken it. Also look for large, sturdy bases with enough material around the holes. If in doubt, choose the largest cleat that the deck has room for.

Fitting on deck

  • Below deck, a backing plate of twice the cleat length and half the cleat length in width is required; on deck, a base plate that is about a quarter longer and wider than the cleat.
  • Fasten with stainless steel bolts rather than screws and place stainless steel washers under the nuts.
  • Where possible, do not fit cleats on decks with a soft core, such as balsa. If this cannot be avoided, the core must be removed beforehand and the area reinforced; leave this work to a specialist workshop where possible.
  • Place fairleads and lip cleats as close to the cleat as possible and avoid changes of direction of the line on the way there.

With the cleats with aluminium backing plate, stainless steel meets aluminium. Complete electrical insulation with insulating sleeves, insulating washers and insulating paste, with no gap between the insulation and the surface, can prevent contact corrosion; on board, however, a seamless separation often cannot be achieved. Therefore also avoid gaps and hollows at the contact point in which water can collect.

Folding and recessed

For some of the recessed cleats, the manufacturer's specification mentions a design that prevents rattling and sits flush when stowed. The folding cleats with two holes or two screws have a plastic rattle stop.

You will find bolts, nuts and backing plates under Eye bolts, screws and nuts; for care, read the guide Caring for stainless steel on your boat.