Wire ropes, turnbuckles & terminals












Here you will find stainless steel wire ropes in 1x19, 7x7, 7x19 and other constructions, bright, with PVC coating or made of duplex stainless steel, plus terminals, thimbles, wire rope clips, turnbuckles and rigging screws, pins and split pins, as well as crimping tools and wire rope cutters. With them you can build and renew guardwires, shrouds, wire rope balustrades and barriers.
Combining wire rope, end fittings and tensioners correctly
The subcategories at a glance
- Wire ropes: stainless steel ropes on the reel in stiff, medium-flexible and flexible construction, bright, coated or made of duplex stainless steel, plus safety lanyards and a guardwire replacement set.
- Terminals: swage, threaded and assembly terminals with fork, eye, thread, countersunk or lens head, plus toggles, eye bolts and hook bolts, and weld-on ends.
- Turnbuckles & rigging screws: turnbuckles with eye and hook, rigging screws with fork, toggle or terminal, turnbuckle nuts, pelican hooks and slip hooks, as well as baby stay tensioners from Wichard.
- Thimbles: thimbles made of stainless steel, duplex stainless steel, aluminium and nylon, tube thimbles and D-rings with thimble.
- Wire rope clips: simplex, duplex and egg-type clips, crimp sleeves made of stainless steel, copper and aluminium, cross clamps, collars and rope stoppers.
- Pins, split pins & stud screws: clevis pins and folding-nose pins, split pins, ring cotter pins, R-clips, lock nuts and stud screws with right-hand or left-hand thread.
- Tools for wire ropes: hydraulic crimping tool with crimping dies, hand crimping tools, wire rope cutters and rope cutters.
Choosing the construction to suit the application
The designation describes the structure: the first number gives the strands, the second the wires per strand. 1x19 consists of a single strand with 19 wires, is very stiff and belongs in static use, for example as a shroud, stay or guardwire. 7x7 can be bent in static use if the bending radius is at least ten times the rope diameter, and is suitable for balustrade infill and suspensions. 7x19 is very flexible thanks to the many fine wires and runs over pulleys, but at the same diameter it reaches a lower breaking load than 7x7 or 1x19.
Everything must match the rope diameter
Thimbles, clips, crimp sleeves, terminals and tensioners must match the diameter and construction of the rope. With coated ropes, check whether a specification refers to the rope itself or to the outer diameter including the coating. Turnbuckles have a right-hand thread on one side and a left-hand thread on the other: when the centre body is turned, both ends are drawn together or apart at the same time.
Breaking load, working load and material
The breaking load is the value at which the rope or component breaks. The working load, WLL for short, is the load to which it may be subjected; it is derived from the breaking load divided by a safety factor. Never estimate these values from similar items: dimensions and load capacity of the chosen version are given in the Technical data tab. According to specialist dealers, simplex and duplex clips are not intended for safety-relevant applications; more on this under Wire rope clips. Most fittings are made of stainless steel A4. Individual items are made of A2, A1, A5 or duplex stainless steel, and crimp sleeves and thimbles also of copper, aluminium or nylon; please check the material specification for the item. Which material belongs where is explained in the guide V2A, V4A or duplex on the boat.






