from 148,75 EUR

Stainless steel clothes rail made to measure for sloping ceiling with angle

Item no.:GARD2
Status:Made to order
Delivery time:5 to 8 working days
min 300 mm
max 2450 mm
min 100 mm
max 1500 mm
Screws:
▾
Ø wall plug:
▾
148,75 EUR
Base price: 371,88 EUR per linear metre
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Made to measure to order
  • Fast shipping

How to determine the order size

Inside dimension equals order size: tape measure showing the clear width of a cupboard compartment

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.

Description

Clothes rail for the sloping ceiling, with adjustable angle

This clothes rail consists of two sections connected by a hinged joint. Section A follows the sloping ceiling, section B runs to the wall. You set the angle between the two during installation, so the rail also suits slopes with an unusual pitch. Made to your measurements in our workshop in Germany.

The two sections

  • Section A: along the slope, fixed with wall brackets
  • Section B: with a ball and a wall flange for fixing to the wall
  • Hinged joint: connects both sections, the angle is set and fixed on site

If you only need a straight rail on the slope, choose the sloping ceiling clothes rail without joint.

Why balls on the rail?

On a sloping rail, coat hangers slide downwards and collect at the lowest point. V2A stainless steel balls of 15 mm, spaced about 6 cm apart, keep each hanger in its place. As a guide: a rail of 100 cm carries about 16 balls, of 120 cm about 19, of 150 cm about 25 and of 170 cm about 29. For intermediate sizes, the number may vary by one or two balls.

Fixing to the slope

The rail is fixed to the sloping ceiling with wall brackets and runs parallel to the surface at a distance of 11 cm. Up to a length of 120 cm, two wall brackets are included, from 120 cm three. The third bracket in the middle halves the free span; because deflection increases with the fourth power of the span, the rail stays straight even when fully loaded.

Material

Round tube 33.7 × 2 mm in V2A stainless steel (1.4301), ground with grit 240. Balls and brackets are also made of V2A.

Installation under the sloping ceiling

Sloping ceilings usually consist of plasterboard or gypsum fibreboard on a timber or metal substructure. Fix the brackets into the rafters or battens behind the board. A detector or a strong magnet will find the rows of screws in the cladding, along which the substructure runs. Where there is no substructure to hit, use metal cavity anchors.

Care

A damp cloth is enough, if necessary with a little washing-up liquid; always wipe in the direction of the grain. Avoid chlorine cleaners, scouring agents and steel wool. Blend in fine scratches with an abrasive fleece in the direction of the grain. More in our care instructions.

You can also plan the clothes rail for sloping ceilings with your measurements in the configurator.

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
Email: info@steel-deal.de

Frequently asked questions

Wie messe ich das richtige Bestellmaß für meine Garderobenstange?

Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.

Welchen Durchmesser sollte ich für meine Garderobenstange wählen?

Handelsübliche Kleiderbügel haben Ø 35 mm Innendurchmesser. Wir empfehlen Stangen mit Ø 33,7 mm. So passen Standard-Kleiderbügel passgenau auf.