from 62,55 EUR

Stainless steel cherry wood clothes hook, coat hook with cap made to measure

Item no.:KB85KAP-Kirsche
Status:Available, expected to ship from 26.11.2026
Delivery time:3 to 5 working days
Ball bonding:
▾
Screws:
▾
Ø wall plug:
▾
S-hooks:
▾
62,55 EUR
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Fast shipping

Description

Stainless steel and wood coat hook, clothes hook in cherry with cap, made to measure

Our coat hooks are made by genuine craftsmanship, 100 % made in Germany.
Every piece stands out for its high-quality materials and precise workmanship.

Product details, set consisting of:

  • 1 x solid wood rod in cherry, Ø 33.7 mm

  • 1 x V2A stainless steel cap as a high-quality finish, with 2.5 mm overhang, incl. grub screw for a secure hold

  • 1 x stainless steel wall flange, Ø 70 mm, with 3 holes of 6.5 mm each

  • Fixing screws and wall plugs (optional, see selection)

Special advantages:

Robust combination of stainless steel and cherry wood for a modern and durable design
Timeless, high-quality design

Note:

The product image shows the cherry version. Please note that your finished product may differ in colour and grain, as wood is a natural product. 

Coat hook in cherry: features and use

A coat hook made to measure: a solid cherry wood rod of 33.7 mm projects perpendicularly from the wall, held by a stainless steel wall flange. At the end, a stainless steel cap with a 2.5 mm overhang keeps the clothes hangers in place. Wood dampens the rattling of the hangers and gives a homely look.

The wood: cherry

Cherry is reddish brown with a fine, calm grain. Under light the wood darkens noticeably and over the years takes on a deep red-brown; this patina is part of its character. At around 600 kg/m³, cherry is medium-heavy and looks warm and classic.

Each piece is naturally grown; colour and grain will differ from the photo. Compare all wood types at the clothes rails made of stainless steel and wood.

How many hangers fit on it

Allow about 5 to 8 cm per hanger with a jacket, up to 10 cm for winter coats. A hook 30 cm long therefore holds three to six jackets. The 33.7 mm hook suits standard hangers whose hook opens to around 35 mm on the inside.

Typical applications

  • Cloakroom in narrow hallways where there is not enough width for a rail
  • Guest cloakroom next to the front door
  • Dressing area and bedroom for the next day's clothes
  • Hotel, practice and office

Installation

Bear the leverage in mind: the longer the hook, the greater the force on the upper screws. Long hooks belong in concrete or solid brick; in plasterboard, screw into the studs of the substructure. A cover rosette, where supplied with the item, is fixed after installation with a little silicone or hot glue. For jackets, mount the hook at a height of about 160 to 180 cm, with several side by side at a spacing of 15 to 25 cm.

All versions

VersionArticle number
Stainless steel with solid ball 20 mmKB85
Stainless steel with capKB85KAP
Maple with capKB85KAP-Ahorn
Beech with capKB85KAP-Buche
Oak with capKB85KAP-Eiche
Ash with capKB85KAP-Esche
Spruce with capKB85KAP-Fichte
Kambala with capKB85KAP-Kambala
Pine with capKB85KAP-Kiefer
Cherry with cap (this page)KB85KAP-Kirsche
Walnut with capKB85KAP-Nussbaum
Stainless steel with pinKB85Pin

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
E-mail: info@steel-deal.de