
Stainless steel and pine wood clothes hook, coat hook with cap, made to measure
- Made in Germany since 2009
- Fast shipping
Description
Stainless steel wooden coat hook, pine clothes hook with cap made to measure
Our coat hooks are made by genuine hand craftsmanship, 100 % made in Germany.
Every piece impresses with high-quality materials and precise workmanship.
Product details, set consisting of:
-
1 x solid pine wood rod, Ø 33.7 mm
-
1 x V2A stainless steel cap as a high-quality finish, with 2.5 mm overhang, incl. grub screw for a secure hold
-
1 x stainless steel wall flange, Ø 70 mm, with 3 holes of 6.5 mm each
-
Fixing screws and wall plugs (optional, see selection)
Special advantages:
Robust combination of stainless steel and pine wood for a modern, durable design
Timeless, high-quality design
Note:
The product image shows the version in pine. Please note that your finished product may differ in colour and grain, as wood is a natural product.
Coat hook in pine: properties and use
A coat hook made to measure: a solid pine wood rod of 33.7 mm projects at right angles from the wall, held by a stainless steel wall flange. At the end, a stainless steel cap with 2.5 mm overhang keeps the hangers in place. Wood dampens the rattling of the hangers and has a homely look.
The wood: pine
Pine is yellowish to reddish, rich in resin and lively in grain, often with knots. At around 520 kg/m³ it is of medium weight. Over time the wood darkens to a warm orange tone and goes well with country-house style and natural wood furniture.
Every piece has grown naturally; colour and grain differ from the photo. Compare all wood types under stainless steel and wood clothes rails.
How many hangers fit on it
Allow about 5 to 8 cm per hanger with a jacket, up to 10 cm for winter coats. A hook with a length of 30 cm therefore holds three to six jackets. The hook with 33.7 mm suits standard hangers whose hook opens to around 35 mm on the inside.
Typical applications
- Cloakroom in narrow hallways where there is not enough width for a rail
- Guest cloakroom next to the front door
- Dressing room and bedroom for the next day's clothes
- Hotels, surgeries and offices
Installation
Bear the leverage in mind: the longer the hook, the greater the force on the upper screws. Long hooks belong in concrete or solid brick; in plasterboard, screw into the studs of the substructure. A cover rosette, if included with the item, is fixed after installation with a little silicone or hot glue. For jackets, mount the hook at a height of around 160 to 180 cm, with several side by side at a spacing of 15 to 25 cm.
All versions
| Version | Article number |
|---|---|
| Stainless steel with 20 mm solid ball | KB85 |
| Stainless steel with cap | KB85KAP |
| Maple with cap | KB85KAP-Ahorn |
| Beech with cap | KB85KAP-Buche |
| Oak with cap | KB85KAP-Eiche |
| Ash with cap | KB85KAP-Esche |
| Spruce with cap | KB85KAP-Fichte |
| Kambala with cap | KB85KAP-Kambala |
| Pine with cap (this page) | KB85KAP-Kiefer |
| Cherry with cap | KB85KAP-Kirsche |
| Walnut with cap | KB85KAP-Nussbaum |
| Stainless steel with pin | KB85Pin |
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
E-mail: info@steel-deal.de