from 66,32 EUR

Stainless Steel Oak Wood Clothes Hook, Coat Hook with Cap, Made to Measure

Item no.:KB85KAP-Eiche
Status:Available, expected to ship from 26.11.2026
Delivery time:3 to 5 working days
Ball bonding:
▾
Screws:
▾
Ø wall plug:
▾
S-hooks:
▾
66,32 EUR
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Fast shipping

Description

Stainless steel and wood coat hook, clothes hook in oak with cap, made to measure

Our coat hooks are made by genuine hand craftsmanship, 100 % made in Germany.
Every piece stands out for its high-quality materials and precise workmanship.

Product details, set consisting of:

  • 1 x solid oak wood rod, Ø 33.7 mm

  • 1 x V2A stainless steel cap as a high-quality end finish, with 2.5 mm overhang, incl. grub screw for secure hold

  • 1 x stainless steel wall flange, Ø 70 mm, with 3 holes of 6.5 mm each

  • Fixing screws and wall plugs (optional, see selection)

Special advantages:

Robust combination of stainless steel and oak wood for a modern and durable design
Timeless, high-quality design

Note:

The product image shows the oak version. Please note that your finished product may differ in colour and grain, as wood is a natural product. 

Coat hook with oak: features and use

A made-to-measure coat hook: a solid oak rod of 33.7 mm projects at right angles from the wall, held by a stainless steel wall flange. At the end, a stainless steel cap with 2.5 mm overhang keeps the hangers in place. Wood dampens the rattling of the hangers and has a homely look.

The wood: oak

Oak is yellow to light brown and shows distinctive pores and the typical ray flecks. At around 700 kg/m³ it is hard and heavy and has been regarded for centuries as the epitome of durable wood. Depending on the setting, an oak rail looks rustic or refined, and it darkens slightly over time.

Every piece is naturally grown; colour and grain differ from the photo. Compare all wood types in our stainless steel and wood clothes rails.

How many hangers fit on it

Allow about 5 to 8 cm per hanger with a jacket, up to 10 cm for winter coats. A hook with a length of 30 cm therefore holds three to six jackets. The 33.7 mm hook suits standard hangers whose hook opens to around 35 mm on the inside.

Typical applications

  • Cloakroom in narrow hallways where there is not enough width for a rail
  • Guest cloakroom next to the front door
  • Dressing area and bedroom for the next day's clothes
  • Hotel, surgery and office

Installation

Mind the leverage: the longer the hook, the greater the force on the upper screws. Long hooks belong in concrete or solid brick; in plasterboard, screw into the studs of the substructure. A cover rosette, where it is included with the item, is fixed after installation with a little silicone or hot glue. For jackets, fit the hook at a height of about 160 to 180 cm, with several side by side at a spacing of 15 to 25 cm.

All versions

VersionArticle number
Stainless steel with solid ball 20 mmKB85
Stainless steel with capKB85KAP
Maple with capKB85KAP-Ahorn
Beech with capKB85KAP-Buche
Oak with cap (this page)KB85KAP-Eiche
Ash with capKB85KAP-Esche
Spruce with capKB85KAP-Fichte
Kambala with capKB85KAP-Kambala
Pine with capKB85KAP-Kiefer
Cherry with capKB85KAP-Kirsche
Walnut with capKB85KAP-Nussbaum
Stainless steel with pinKB85Pin

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
Email: info@steel-deal.de