from 46,51 EUR

Stainless steel and spruce wood clothes hook, coat hook with cap, made to measure

Item no.:KB85KAP-Fichte
Status:Available, expected to ship from 26.11.2026
Delivery time:3 to 5 working days
Ball bonding:
▾
Screws:
▾
Ø wall plug:
▾
S-hooks:
▾
46,51 EUR
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Fast shipping

Description

Stainless Steel and Wood Coat Hook, Clothes Hook in Spruce with Cap, Made to Measure

Our coat hooks are made by genuine hand craftsmanship, 100% made in Germany.
Every piece stands out for its high-quality materials and precise workmanship.

Product details, set consisting of:

  • 1 x solid spruce rod, Ø 33.7 mm

  • 1 x V2A stainless steel cap as a high-quality finish, with 2.5 mm protrusion, incl. grub screw for secure hold

  • 1 x stainless steel wall flange, Ø 70 mm, with 3 holes of 6.5 mm each

  • Fixing screws and wall plugs (optional, see selection)

Special advantages:

Robust combination of stainless steel and spruce wood for a modern and durable design
Timeless, high-quality design

Note:

The product image shows the spruce version. Please note that your finished product may differ in colour and grain, as wood is a natural product. 

Coat hook in spruce: features and use

A coat hook made to measure: a solid spruce rod of 33.7 mm projects horizontally from the wall, held by a stainless steel wall flange. At the end, a stainless steel cap with 2.5 mm protrusion keeps the hangers in place. Wood dampens the rattling of the hangers and gives a homely feel.

The wood: spruce

Spruce is very light, yellowish white, with clearly visible annual rings. As a softwood it is light at around 450 kg/m³ and softer than hardwoods. A spruce rod looks natural and uncomplicated and is the most affordable wood in the range.

Every piece is naturally grown; colour and grain differ from the photo. See all wood types compared under clothes rails made of stainless steel and wood.

How many hangers fit on it

Allow roughly 5 to 8 cm per hanger with a jacket, and up to 10 cm for winter coats. A hook 30 cm long therefore holds three to six jackets. The 33.7 mm hook suits standard hangers whose hook opens to around 35 mm on the inside.

Typical applications

  • Cloakroom in narrow hallways where there is not enough width for a rail
  • Guest cloakroom next to the front door
  • Dressing area and bedroom for the next day's clothes
  • Hotels, surgeries and offices

Installation

Bear the leverage in mind: the longer the hook, the greater the force on the upper screws. Long hooks belong in concrete or solid brick; in plasterboard, screw into the studs of the substructure. A cover rosette, if included with the item, is fixed after installation with a little silicone or hot glue. For jackets, mount the hook at a height of about 160 to 180 cm, with several side by side at 15 to 25 cm spacing.

All versions

VersionArticle number
Stainless steel with 20 mm solid ballKB85
Stainless steel with capKB85KAP
Maple with capKB85KAP-Ahorn
Beech with capKB85KAP-Buche
Oak with capKB85KAP-Eiche
Ash with capKB85KAP-Esche
Spruce with cap (this page)KB85KAP-Fichte
Kambala with capKB85KAP-Kambala
Pine with capKB85KAP-Kiefer
Cherry with capKB85KAP-Kirsche
Walnut with capKB85KAP-Nussbaum
Stainless steel with pinKB85Pin

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
Email: info@steel-deal.de