Cleaning
Care for stainless steel: abrasive fleece for brushed surfaces and tips on keeping clothes rails, handrails and railings clean and corrosion-resistant in the long term.
How to clean stainless steel properly
Stainless steel is corrosion-resistant because chromium forms a passive layer on the surface. This layer renews itself as long as air reaches the surface. Care therefore mainly means removing deposits that disrupt the passive layer.
Everyday cleaning
A soft cloth with warm water is usually enough. For grease and fingerprints, a little washing-up liquid helps. Then wipe dry to avoid limescale marks. On brushed surfaces, always wipe in the direction of the grain.
What damages stainless steel
- Chlorine and hydrochloric acid: chlorine cleaners, tile cleaners containing hydrochloric acid and swimming pool chemicals attack the passive layer.
- Steel wool and wire brushes: they leave behind iron particles, which show up as surface rust.
- Scouring agents: they scratch polished surfaces.
- Sparks and grinding dust: cover stainless steel when cutting or grinding nearby.
- Cement and lime dust: wash off immediately during building work.
Removing surface rust and discolouration
Reddish-brown spots on stainless steel are almost always contamination rust, that is, iron particles from outside. On brushed surfaces, you can remove it with the abrasive fleece grit 240 to 280: dampen it slightly and rub evenly in the direction of the grain along the full length with light pressure. This restores a uniform brushed finish. The fleece is 10 cm wide, coated with aluminium oxide, can be used wet and dry, and is also suitable for deburring and matting. For polished surfaces, use a stainless steel polish, as the fleece would dull them.
How often?
Indoors, cleaning as required is sufficient. Outdoors, on roads treated with grit salt or near the coast, we recommend rinsing stainless steel with clean water several times a year. You will find more in our stainless steel care instructions.

