
Example image
Stainless steel solid ball V2A Ø30mm ground thread M8
4,76 EUR
incl. 19% VAT plus shipping
- Made in Germany since 2009
- Fast shipping
Description
Accessories
Description
Stainless steel solid ball
- Ø 30 mm
- ground, grit 240
- with M8 blind thread
- Material: V2A AISI 304
Also available polished on request, please contact us!
Stainless steel solid ball: properties and use
The solid ball is turned from solid V2A stainless steel and ground to grit 240. It is heavy, practically indestructible and its surface matches ground tubes, hooks and handrails.
Bore and fixing
- Thread M6, M8 or M10: for screwing onto a threaded pin, hanger bolt, threaded rod or a plug with thread
- Blind hole 10.2 or 12.2 mm: for pushing onto and bonding to a round bar of 10 or 12 mm; the bore ends inside the ball, the top remains closed
- Through hole 10.2 or 12.2 mm: for threading onto a bar or rope, for example as a spacer, decorative element or rope stopper
Typical applications
- End piece for coat hooks and clothes hooks, so that hangers do not slip off
- Finial on balustrade posts, stair posts and fence posts
- Grip knob on levers, drawers and furniture
- Decorative ball on gates, letterbox posts and in shop fitting
Installation
On a thread: apply a drop of thread locker to the thread and screw on hand-tight. On a bar: degrease the bar and the bore and bond with epoxy adhesive. On an open tube the ball is not fixed directly; for this, first drive in a plug with thread and screw the ball onto it.
Hollow ball or solid ball?
The solid ball is heavier and resistant to impacts. For large diameters and post tops where weight is not a factor, a hollow ball is lighter and cheaper.
All versions
| Diameter | Bore | Article number |
|---|---|---|
| 15 mm | Thread M6 | 450400 |
| 20 mm | Thread M6 | K12 |
| 25 mm | Through hole Ø 10.2 mm | K26 |
| 25 mm | Through hole Ø 12.2 mm | K27 |
| 25 mm | Thread M6 | K22 |
| 25 mm | Blind hole Ø 10.2 mm | K23 |
| 25 mm | Blind hole Ø 12.2 mm | K24 |
| 30 mm | Through hole Ø 10.2 mm | K36 |
| 30 mm | Through hole Ø 12.2 mm | K37 |
| 30 mm | Thread M6 | K31 |
| 30 mm (this page) | Thread M8 | K32 |
| 30 mm | Blind hole Ø 10.2 mm | K33 |
| 30 mm | Blind hole Ø 12.2 mm | K34 |
| 35 mm | Through hole Ø 12.2 mm | K47 |
| 35 mm | Thread M6 | K41 |
| 35 mm | Thread M8 | K42 |
| 35 mm | Blind hole Ø 12.2 mm | K44 |
| 40 mm | Thread M10 | K53 |
| 40 mm | Thread M6 | K51 |
| 40 mm | Thread M8 | K52 |
| 50 mm | Thread M10 | K72 |
| 50 mm | Thread M8 | K71 |
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
E-mail: info@steel-deal.de