from 29,03 EUR

I-shape stainless steel clothes rail

Item no.:KS12
Status:Made to order
Delivery time:3 to 5 working days
min 300 mm
max 1700 mm
Screws:
▾
Ø wall plug:
▾
S-hooks:
▾
29,03 EUR
Base price: 96,77 EUR per linear metre
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Made to measure to order
  • Fast shipping

How to determine the order size

Inside dimension equals order size: tape measure showing the clear width of a cupboard compartment

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.

Description

I-shaped clothes rail for wardrobe and alcove

A straight stainless steel clothes rail made from 33.7 × 2 mm tube for installation from wall to wall, in a wardrobe, a built-in cupboard or an alcove. Made to your measurements in our workshop in Germany.

Clothes hangers

The hook of a standard clothes hanger has an internal opening of around 35 mm. On the 33.7 mm tube it therefore sits steadily without tipping, yet still slides easily.

Material and surface

Stainless steel V2A, material 1.4301 (AISI 304), ground with grit 240. The brushed, satin-matt grain shows hardly any fingerprints and forgives signs of use. The chromium in the steel forms a protective layer that renews itself after scratches; in living spaces V2A is permanently corrosion-resistant.

How to measure correctly

The ordering dimension is the overall dimension: the distance from wall to wall at the height at which the rail is to sit, including flanges. Measure at the front and at the back, as alcoves are rarely exactly parallel, and state the smaller dimension. Tiles, skirting boards or plaster edges must be included in the measurement. We cut the tube so that tube and flanges together give exactly your dimension.

Example: your alcove measures 80.3 cm. Then order 80.3 cm.

Guide values for planning

  • Rail centre about 28 to 30 cm in front of the back wall, so that jackets and coats hang freely
  • For long clothing, the rail at about 170 to 180 cm above the floor; for shirts and jackets, a hanging height of around 100 cm is sufficient
  • At least 5 cm of clearance between the rail and the shelf or ceiling, so that the hangers can be lifted off

Accessories

Polished S-hooks for 33.7 mm turn the rail into a hook rail for bags and belts; slide them onto the tube before installation.

Installation and substrate

In concrete and solid brick, expansion anchors hold very well. In perforated brick and aerated concrete, long anchors or injection anchors grip better; in plasterboard, screw into the studs of the substructure or use metal cavity anchors. Drill the hole deeper than the anchor length by the anchor diameter. Choose stainless steel screws and anchors directly above, together with the rail.

Care

A damp cloth is sufficient, with a little washing-up liquid if necessary; always wipe in the direction of the grain. Avoid chlorine cleaners, abrasive cleaners and steel wool. Level out fine scratches with an abrasive fleece in the direction of the grain. More in our care instructions.

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
Email: info@steel-deal.de

Frequently asked questions

Wie messe ich das richtige Bestellmaß für meine Garderobenstange?

Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.

Welchen Durchmesser sollte ich für meine Garderobenstange wählen?

Handelsübliche Kleiderbügel haben Ø 35 mm Innendurchmesser. Wir empfehlen Stangen mit Ø 33,7 mm. So passen Standard-Kleiderbügel passgenau auf.