
Stainless Steel Clothes Rail U-Shape Angular
max 1990 mm
max 500 mm
max 500 mm
- Made in Germany since 2009
- Made to measure to order
- Fast shipping
How to determine the order size

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.
Description
Square U-shape, welded made to measure
Three stainless steel tubes, welded at two right angles and neatly ground smooth. The sharply defined corners look clean and architectural. Equal or unequal legs, made to your dimensions in our workshop in Germany. Prefer soft corners without a weld seam? Then choose the bent U-shape.
What the U-shape is designed for
The U-shape needs no side walls: both legs are fixed to the same surface, on the ceiling, under a shelf or on the wall. This makes it suitable for self-built and walk-in wardrobes, open dressing areas and anywhere a rail is meant to hang freely. Suspended from the ceiling, it creates room for long coats, because no furniture has to stand underneath.
The three dimensions
You specify the two depths and the length of the rail. The depths can be equal or different. The dimensions refer to the tube; each fixing side adds about 2 cm for the anchor plate and rosette. Example: a desired dimension of 20 × 110 × 20 cm results, with cover rosettes, in an overall dimension of 20 × 114 × 20 cm.
Clearance and height
On the wall we recommend a depth of about 30 cm so that hangers hang freely. On the ceiling, the depth determines the height of the rail: with a room height of 250 cm and a depth of 70 cm, the rail sits at 180 cm, leaving room underneath for coats and dresses.
Clothes hangers
The hook of a standard clothes hanger has an inner opening of around 35 mm. On the 33.7 mm tube it therefore sits steadily without tipping, and still slides easily.
Material and fixing
Round tube 33.7 × 2 mm in stainless steel V2A (1.4301), ground to grit 240, corrosion-resistant. It is fixed with stainless steel screws 6 × 60 mm and plastic wall plugs M8 with collar. After installation, secure the cover rosettes with a little silicone or hot glue. In concrete ceilings, expansion anchors hold; in timber joist ceilings, screw into the joists.
Care
A damp cloth is sufficient, with a little washing-up liquid if required; always wipe in the direction of the grain. Do not use chlorine-based cleaners, abrasive agents or steel wool. Blend fine scratches in with an abrasive fleece in the direction of the grain. More in our care instructions.
In the configurator you can see the price for your dimensions immediately.
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
E-mail: info@steel-deal.de
Frequently asked questions
Wie messe ich das richtige Bestellmaß für meine Garderobenstange?
Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.
Wie plane ich Breite, Tiefe und Belastbarkeit meiner U-Form-Garderobenstange?
Messen Sie Länge A, Tiefe B und Tiefe C separat als Außenmaß und geben Sie alle drei im Konfigurator ein. Ab 150 cm Länge A: Mittelhalter empfohlen.
Für welche Einbausituationen ist eine U-Form-Garderobenstange am besten geeignet?
Ideal für begehbare Kleiderschränke, tiefe Nischen und Ankleideräume, überall dort, wo drei Seiten umlaufend bespannt werden sollen.
Was ist der Unterschied zwischen L-Form und U-Form bei Garderobenstangen?
L-Form: 2 Schenkel, 1 Ecke (Raumecken). U-Form: 3 Schenkel, 2 Ecken (Walk-in-Closets, größere Nischen).
Kann die U-Form-Garderobenstange auch an der Decke befestigt werden?
Ja, Deckenmontage ist möglich. Für reine Deckenmontage empfiehlt sich unsere Deckenmontage-Variante.
Wie viele Wandbefestigungspunkte benötigt eine U-Form-Garderobenstange?
Standard: 4 Wandflansche (je 2 links und rechts). Bei hinterem Schenkel über 150 cm: zusätzlicher Mittelhalter empfohlen.
Wie viel Gewicht trägt eine U-Form-Garderobenstange aus Edelstahl?
30 bis 40 kg je Schenkel (100 cm Länge) sind praxistauglich. Bei langen Schenkeln und hoher Beladung: Mittelhalter empfehlenswert.