from 41,08 EUR

Stainless steel clothes rail made from square tube with wall flange

Item no.:GAR30302
Status:Made to order
Delivery time:3 to 5 working days
min 300 mm
max 1700 mm
Screws:
▾
Ø wall plug:
▾
41,08 EUR
Base price: 136,93 EUR per linear metre
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Made to measure to order
  • Fast shipping

How to determine the order size

Inside dimension equals order size: tape measure showing the clear width of a cupboard compartment

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.

Description

Clothes rail made from square tube with wall flange

A stainless steel square tube clothes rail for wall-to-wall mounting. The angular profile echoes the lines of tiles, fronts and shelving. Made to your measurements in our workshop in Germany.

Fixing

Square stainless steel wall flanges are fixed to both walls with visible screws; the installation tolerates small inaccuracies in the alcove.

Square or round?

On the round tube, coat hangers slide a little more easily; on the square tube they stay in place. Visually, the square tube suits clean, straight-lined interiors and the round tube classic ones. The round version is available as a clothes rail with wall flange and with concealed fixing.

Material and finish

Stainless steel V2A, material 1.4301 (AISI 304), ground with grit 240. The brushed, satin-matt grain shows hardly any fingerprints and forgives signs of use. The chromium in the steel forms a protective layer that renews itself after scratches; in living spaces V2A is permanently resistant to rust.

How to measure correctly

The ordering dimension is the outside dimension: the distance from wall to wall at the height where the rail is to sit, including the flanges. Measure at the front and at the back, as alcoves are rarely exactly parallel, and state the smaller dimension. Tiles, skirting boards or plaster edges must be included in the measurement. We cut the tube so that tube and flanges together give exactly your dimension.

Example: your alcove measures 80.3 cm. Then order 80.3 cm.

Guide values for planning

  • Rail centre about 28 to 30 cm in front of the back wall, so that jackets and coats hang freely
  • for long clothing, the rail at about 170 to 180 cm above the floor; for shirts and jackets, a hanging height of around 100 cm is sufficient
  • at least 5 cm of clearance between the rail and the shelf or ceiling, so that the hangers can be unhooked

Installation and substrate

In concrete and solid brick, expansion anchors hold very well. In perforated brick and aerated concrete, long plugs or injection anchors grip better; in plasterboard, screw into the studs of the substructure or use metal cavity fixings. Drill the hole deeper than the plug length by the plug diameter. Select stainless steel screws and plugs together with the product above.

Care

A damp cloth is sufficient, with a little washing-up liquid if needed; always wipe in the direction of the grain. Avoid chlorine-based cleaners, scouring agents and steel wool. Blend fine scratches with an abrasive fleece in the direction of the grain. More in our care instructions.

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
E-mail: info@steel-deal.de

Frequently asked questions

Wie messe ich das richtige Bestellmaß für meine Garderobenstange?

Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.