
Stainless steel coat hook, clothes hook with cap
max 500 mm
- Made in Germany since 2009
- Made to measure to order
- Fast shipping
How to determine the order size

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.
Description
Stainless steel coat hook / clothes hook with cap, made to measure in Germany. The stainless steel cap (2.5 mm projection) at the end prevents the clothes hangers from falling off.
Scope of delivery
- 1 × stainless steel tube 33.7×2 mm, ground to grit 240
- 1 × V2A cap as end piece, 2.5 mm projection incl. grub screw
- 1 × stainless steel disc 70×4 mm incl. 4 holes of 6.5 mm
- 1 × cover rosette 76 mm, bore 33.9 mm, ground to grit 240
- Screws / wall plugs (selection above)
The disc/mounting plate is welded to the tube, making it particularly sturdy. Corrosion resistant, also suitable for outdoor use.
Important: After installation, the cover rosette must be fixed with a little silicone or a hot glue gun.
Coat hook with cap: features and use
A coat hook made of stainless steel tube 33.7 mm that projects at a right angle from the wall. The stainless steel cap at the end projects 2.5 mm beyond the tube and holds clothes hangers back.
How many hangers fit on it
Allow about 5 to 8 cm per hanger with a jacket, up to 10 cm for winter coats. A hook with a length of 30 cm therefore holds three to six jackets. The hook with 33.7 mm suits standard hangers whose hook opens to around 35 mm on the inside.
Typical applications
- Coat storage in narrow hallways where there is not enough width for a rail
- Guest cloakroom next to the front door
- Dressing area and bedroom for the next day's clothes
- Hotel, surgery and office
Installation
Bear the leverage in mind: the longer the hook, the greater the force on the upper screws. Long hooks belong in concrete or solid brick; in plasterboard, screw into the studs of the substructure. A cover rosette, where included with the item, is fixed after installation with a little silicone or hot glue. For jackets, mount the hook at a height of about 160 to 180 cm, with several side by side at a spacing of 15 to 25 cm.
All versions
| Version | Article number |
|---|---|
| Stainless steel with solid ball 20 mm | KB85 |
| Stainless steel with cap (this page) | KB85KAP |
| Maple with cap | KB85KAP-Ahorn |
| Beech with cap | KB85KAP-Buche |
| Oak with cap | KB85KAP-Eiche |
| Ash with cap | KB85KAP-Esche |
| Spruce with cap | KB85KAP-Fichte |
| Kambala with cap | KB85KAP-Kambala |
| Pine with cap | KB85KAP-Kiefer |
| Cherry with cap | KB85KAP-Kirsche |
| Walnut with cap | KB85KAP-Nussbaum |
| Stainless steel with pin | KB85Pin |
Product and Safety Information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
E-mail: info@steel-deal.de
Frequently asked questions
Wie messe ich das richtige Bestellmaß für meine Garderobenstange?
Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.
Welchen Durchmesser sollte ich für meine Garderobenstange wählen?
Handelsübliche Kleiderbügel haben Ø 35 mm Innendurchmesser. Wir empfehlen Stangen mit Ø 33,7 mm. So passen Standard-Kleiderbügel passgenau auf.