Electrics
Glands and pumps for the boat's electrical system: cable deck glands in A4 stainless steel or chrome-plated brass, A4 swan necks for cables through the deck or superstructure, and electric bilge pumps from the Rule series by Xylem, as a fully automatic pump and as an extra flat submersible pump.





Routing cables through the deck and pumping out the bilge
Cable deck gland or swan neck
A cable deck gland routes a cable through the deck watertight. The A4 versions each cover a range of cable diameters, while the chrome-plated brass versions are made for one specific cable diameter. Measure the outer diameter of your cable first and choose the version accordingly. The swan neck is available in several sizes, with the dimensions given for each version; choose it according to the number and thickness of the cables.
Bilge pump: automatic or with switch
The Rule Automatic does not need a float switch. It switches on every 2.5 minutes for about one second; if it detects the resistance of water during this time, it keeps running until the water has been pumped out. The Rule LoPro 900 is an extremely flat submersible pump that also fits into narrow bilges. The version without sensor (900D) needs a float switch or a manual switch. The version with sensor (900S) has a level sensor adjustable in two stages and starts at a water level of 3 or 5 cm. The LoPro 900 has a non-return valve that prevents water from flowing back into the bilge, and can be installed horizontally or vertically. Delivery rate and voltage are given for each version.
You will find drain plugs and drains for hull and cockpit under Equipment.
