Engine & Drive
Wear and accessory items for outboard and inboard engines: sacrificial anodes for Volvo Penta drives DPS-A, Saildrive 130 and 150 as well as 280 and 290 Single Prop, conical shaft anodes, impellers for the cooling water pumps of engines from Tohatsu, Mercury, Yamaha, Volvo Penta and Yanmar, engine flushing attachments, trim tabs and engine brackets.














Anodes, impellers and accessories for the boat engine
Choosing the right anode alloy
Sacrificial anodes dissolve in place of the drive and propeller and so protect them from galvanic corrosion. Which alloy is suitable depends on where you boat. For its drives, Volvo Penta recommends aluminium in salt water and brackish water, zinc for some older drives, and magnesium in fresh water. Compare the Volvo Penta number given with each anode for Volvo Penta drives with the specification for your drive. For the shaft anodes, the rule is: zinc for seawater, magnesium for fresh water. Magnesium anodes do not belong on wooden hulls, as they damage the boat's structure.
Fitting and inspection
An anode must be in direct contact with the metal it protects. Do not paint the anode or its surroundings with paint or antifouling, and do not grease it, otherwise it loses its electrically conductive connection and becomes ineffective. For Volvo Penta drives, the operating manual states when an anode needs to be replaced.
Impeller and flushing attachment
You match the impeller using the engine manufacturer's reference number, the number of vanes and the outside diameter; all three details are given with each impeller. Some impellers are available as a set. The flushing attachment for outboards and Z-drives is used to flush out salt water. You clamp it over the intake slots and connect it to the water supply with a 3/4-inch hose; while flushing, the engine may only run at idle. The trim tabs come as a set for left and right with stainless steel screws. For engine brackets and trim tabs, the suitable engine power is given with each version.
You will also find outboard brackets for the stern under Hooks & Holders, and an outboard lock under Equipment.
