Bimini & Boat Covers

Bimini & Boat Covers

Sun protection and cover accessories for the boat: three-bow bimini tops in several heights and mounting widths with blue or white polyester fabric, connectors and end pieces made of PVC for 20 mm tube, bimini holders for inflatable boats and telescopic supports for boat covers and tarpaulins.

Items 1 to 10 of 10
ImageDescriptionItem no.DimensionMaterialUnitPriceDelivery timeBuy
3-arm Bimini, height 110 cm, blue2 versionsfrom 80,00 EUR per piece3 to 5 working daysAll versions
Blau, Montagebreite 200 bis 230 cm3B-200single80,00 EUR per piece3 to 5 working days
Blau, Montagebreite 225 bis 255 cm3B-225single80,00 EUR per piece3 to 5 working days
3-arm Bimini, height 110 cm, white4 versionsfrom 80,00 EUR per piece3 to 5 working daysAll versions
Weiss, Montagebreite 130 bis 160 cm3W-130single80,00 EUR per piece3 to 5 working days
Weiss, Montagebreite 170 bis 200 cm3W-170single80,00 EUR per piece3 to 5 working days
Weiss, Montagebreite 200 bis 230 cm3W-200single80,00 EUR per piece3 to 5 working days
Weiss, Montagebreite 225 bis 255 cm3W-225single80,00 EUR per piece3 to 5 working days
3-arm Bimini, height 140 cm, blue5 versionsfrom 80,00 EUR per piece3 to 5 working daysAll versions
3-arm Bimini, height 140 cm, white4 versionsfrom 80,00 EUR per piece3 to 5 working daysAll versions
Weiss, Montagebreite 150 bis 185 cm3W-H-150single80,00 EUR per piece3 to 5 working days
Weiss, Montagebreite 185 bis 225 cm3W-H-185single80,00 EUR per piece3 to 5 working days
Weiss, Montagebreite 200 bis 240 cm3W-H-200single80,00 EUR per piece3 to 5 working days
Weiss, Montagebreite 225 bis 265 cm3W-H-225single80,00 EUR per piece3 to 5 working days
Bimini holder for inflatable boatsPVC-AT-SBsingle5,39 EUR per piece3 to 5 working days
PVC end piece for 20 mm tubePVC-END-20single1,99 EUR per piece3 to 5 working days
PVC connector for 20 mm tubePVC-RVE-20single3,39 EUR per piece3 to 5 working days
Telescopic support 100 to 180 cm flat tip Ø38 mmTS-100-180-FLength ca. 100 bis 180 cmsingle26,99 EUR per piece3 to 5 working days
Telescopic support with large oval cap2 versionsfrom 12,49 EUR per piece3 to 5 working daysAll versions
ca. 75 bis 120 cmTS-075-120Length ca. 75 bis 120 cmsingle12,49 EUR per piece3 to 5 working days
ca. 90 bis 160 cmTS-090-160Length ca. 90 bis 160 cmsingle14,99 EUR per piece3 to 5 working days
Telescopic support, sturdy version, with round cap Ø 120mm2 versionsfrom 16,99 EUR per piece3 to 5 working daysAll versions
ca. 60 bis 100 cmTSS-60-100Length ca. 60 bis 100 cmsingle16,99 EUR per piece3 to 5 working days
ca. 90 bis 150 cmTSS-90-150Length ca. 90 bis 150 cmsingle17,99 EUR per piece3 to 5 working days

Bimini and cover: size, structure and use

Choosing a bimini by width and height

Measure the width across the boat, at the point where the fittings are to sit. Choose the version whose mounting width includes your measurement; the mounting width is shown for each version. As for the height: a higher bimini gives more headroom, but covers the desired area less well, and its wind resistance increases.

Structure and limits

The bimini tops have a three-bow aluminium frame with PVC fittings, fastening material and a protective cover with zip. The fabric is Terylene, a polyester fibre fabric with high tear strength, UV-resistant and water-repellent. The deployed bimini is designed only for slow speed and light wind; the limit is stated in the description of each version. Fold it down at higher speed or in stronger wind, and also before you tow the boat on the trailer by road. For frames with 20 mm tube there are PVC connectors and end pieces; the bimini holder made of grey rubber is intended for inflatable boats.

Supporting covers with telescopic supports

If a tarpaulin lies too flat, hollows form in which water collects; a good cover lets the water run off. Telescopic supports raise the cover at individual points and so give it a slope. The supports with flat or round cap are made of anodised aluminium and are infinitely adjustable; the flat cap is made of soft rubber, the round one of soft plastic. The sturdy version with round cap has a thicker tube. There are also supports with a large oval cap. The length is shown for each version. The support with flat cap is suitable for boat covers, tarpaulins and hoods as well as for tents.

Fasteners for the tarpaulin can be found under snap fastener systems, shock cord for tensioning under Rope & lines.