1,37 EUR per piece

Round shackle, curved, matt black

Item no.:8260404DBK
EAN:4022697840543
Status:Available, expected to ship from 25.11.2026
Delivery time:3 to 5 working days
Version:
▾
Packaging unit:20 pieces
1,37 EUR per piece
Sold per 20 pieces (1 PU = 27,45 EUR)
incl. 19% VAT plus shipping
Sold in steps of 20 (1 PU)
  • Made in Germany since 2009
  • Fast shipping

All versions

Enter a quantity and add several versions to the basket in one step. Clicking a version selects it in the purchase area above.

5 versions

Versions of Round shackle, curved, matt black
VersionItem no.Material diameterMaterialUnitPriceDelivery timeQuantity
4mm, PU 20 pcsselected8260404DBK4 mmA4 / V4APackaging unit: 20 pieces1,37 EUR per piece1 PU = 27,45 EUR3 to 5 working days
5mm, PU 20 pcs8260405DBK5 mmA4 / V4APackaging unit: 20 pieces1,72 EUR per piece1 PU = 34,45 EUR3 to 5 working days
6mm, PU 20 pcs8260406DBK6 mmA4 / V4APackaging unit: 20 pieces2,21 EUR per piece1 PU = 44,21 EUR3 to 5 working days
8mm, PU 10 pcs8260408DBK8 mmA4 / V4APackaging unit: 10 pieces3,54 EUR per piece1 PU = 35,37 EUR3 to 5 working days
10mm, PU 10 pcs8260410DBK10 mmA4 / V4APackaging unit: 10 pieces5,58 EUR per piece1 PU = 55,82 EUR3 to 5 working days
No quantity entered yet.

Description

Round shackle, curved: features and use

The curved shackle, also known as a bow shackle, has a bulged bow. It has room for several eyes side by side and also takes load at an angle to the longitudinal axis.

Versions and packaging units

VersionArticle numberEANAvailable asBreaking load
4mm8260404DBK4022697840543Packaging unit of 20 pieces800 kg
5mm8260405DBK4022697840550Packaging unit of 20 pieces1,200 kg
6mm8260406DBK4022697840567Packaging unit of 20 pieces1,800 kg
8mm8260408DBK4022697840574Packaging unit of 10 pieces2,800 kg
10mm8260410DBK4022697840581Packaging unit of 10 pieces4,300 kg

We supply these parts in the packaging unit stated. Dimensions, material and breaking load of the selected version are listed in the Technical data tab.

Features

  • bulged bow with greater inner width in the curve (iB1)
  • suitable for several attached parts and changing directions of pull
  • screw pin, A4 stainless steel (AISI 316), matt black

Typical applications

  • Collection point for several lines, for example at the bow fitting
  • Attaching blocks that need to align freely
  • Corner points of shade sails where two tensioning directions meet

Selection and fitting

  • With the curved shackle too, the full breaking load applies only to pull along the central axis; the further the load moves to the side, the lower the load capacity.
  • Screw the pin in fully and secure it with rigging twine or wire.

Material and care

A4 stainless steel corresponds to AISI 316 (V4A, material 1.4401). Besides chromium and nickel, it contains just over 2 per cent molybdenum, which makes it considerably more resistant to salt water and chloride-laden air than A2. On this material, the Blackline fittings have a matt black finish that suits dark decks, carbon, teak and modern interiors.

Care: rinse with fresh water after trips in salt water and, if necessary, clean with mild soapy water and a soft cloth. Abrasives, steel wool and polishing pastes damage the matt finish and should not be used on these fittings.

Important: According to the manufacturer, Blackline products are not intended for lifting loads or for use as personal protective equipment. Breaking load figures are non-binding and apply only to correct axial single-strand loading without spreading. The permissible working load is well below the breaking load; allow a generous safety margin.

Product and safety information

Manufacturer: Marinetech Edelstahlhandel GmbH & Co. KG, Marschgehren 16, 28779 Bremen
Country of origin: Germany
Contact: info@steel-deal.de