
Cast eye nut similar to DIN 582, matt black
- Made in Germany since 2009
- Fast shipping
All versions
Enter a quantity and add several versions to the basket in one step. Clicking a version selects it in the purchase area above.
3 versions
| Version | Item no. | Thread | Material | Unit | Price | Delivery time | Quantity |
|---|---|---|---|---|---|---|---|
| M5, PU 10 pcsselected | 8268405DBK | M5 | A4 / V4A | Packaging unit: 10 pieces | 1,49 EUR per piece1 PU = 14,92 EUR | 3 to 5 working days | |
| M8, PU 10 pcs | 8268408DBK | M8 | A4 / V4A | Packaging unit: 10 pieces | 2,85 EUR per piece1 PU = 28,46 EUR | 3 to 5 working days | |
| M10, PU 5 pcs | 8268410DBK | M10 | A4 / V4A | Packaging unit: 5 pieces | 4,90 EUR per piece1 PU = 24,50 EUR | 3 to 5 working days |
Description
Eye nut, cast, similar to DIN 582: features and use
An eye nut turns any threaded bolt into an attachment point. It is screwed onto a threaded rod or bolt and provides a large ring for shackles, hooks and lines.
Versions and packaging units
| Version | Article number | EAN | Available as | Breaking load |
|---|---|---|---|---|
| M5 | 8268405DBK | 4022697840598 | Packaging unit of 10 pieces | 320 kg |
| M8 | 8268408DBK | 4022697840611 | Packaging unit of 10 pieces | 820 kg |
| M10 | 8268410DBK | 4022697840628 | Packaging unit of 5 pieces | 1,350 kg |
We supply these parts in the packaging unit stated. Dimensions, material and breaking load of the selected version can be found in the Technical data tab.
Features
- cast ring with internal thread, shape similar to DIN 582
- thread M5 to M10
- stainless steel A4 (AISI 316), matt black
Typical applications
- attachment point on through bolts on deck and superstructure
- anchor points for shade sails on walls and posts using threaded rod and chemical anchor
- suspension points for lights, hanging planters and hanging decorations
Selection and installation
- According to the manufacturer, eye nuts are not intended for lifting loads.
- Screw the nut in fully, down to the bearing surface; only then does the entire thread carry the load.
- The load should act in the direction of the thread axis. Lateral pull places greater stress on the connection.
Material and care
Stainless steel A4 corresponds to AISI 316 (V4A, material 1.4401). In addition to chromium and nickel, it contains just over 2 per cent molybdenum, which makes it considerably more resistant to salt water and chloride-laden air than A2. On this material, the Blackline fittings have a matt black finish that suits dark decks, carbon, teak and modern interiors.
Care: after trips in salt water, rinse with fresh water and, if necessary, clean with mild soapy water and a soft cloth. Abrasive cleaners, steel wool and polishing pastes attack the matt finish and should not be used on these fittings.
Important: According to the manufacturer, Blackline articles are not intended for lifting loads or for use as personal protective equipment. Breaking load figures are non-binding and apply only to correct axial single-strand loading without splaying. The permissible working load is well below the breaking load; allow a generous safety margin.
Product and safety information
Manufacturer: Marinetech Edelstahlhandel GmbH & Co. KG, Marschgehren 16, 28779 BremenCountry of origin: Germany
Contact: info@steel-deal.de