
Example image
- Made in Germany since 2009
- Fast shipping
All versions
Enter a quantity and add several versions to the basket in one step. Clicking a version selects it in the purchase area above.
2 versions
| Version | Item no. | Material | Unit | Price | Delivery time | Quantity |
|---|---|---|---|---|---|---|
| 57mm round, without lockselected | 814739445RDB | A4 / V4A | single | 103,41 EUR per piece | 3 to 5 working days | |
| 57mm round, with lock | 814739445RSDB | A4 / V4A | single | 131,23 EUR per piece | 3 to 5 working days |
Description
Flush pull: features and use
A flush pull sits flush in a hatch, a floorboard or a flap. To open, you fold the handle up; at rest everything lies flat, nobody trips over the handle and no line gets caught.
Versions and packaging units
| Version | Article number | EAN | Available as |
|---|---|---|---|
| 57mm round, without lock | 814739445RDB | 4022697836331 | individually |
| 57mm round, with lock | 814739445RSDB | 4022697841144 | individually |
Dimensions and material of the selected version are given in the Technical data tab.
Features
- flush recessed cup with folding handle
- round or square, with or without lock, partly watertight; details in the selection
- Stainless steel A4 (AISI 316), matt black
Manufacturer information
- Large grip opening for a comfortable hold
- The plastic slide with two springs ensures quiet operation, also below deck
- The adjustable slide allows adjustments after installation
- The counter plate can be mounted on either side for a wide range of door thicknesses
- The supplied seal makes further sealing unnecessary
- Screws for installation are included in the scope of delivery
- No screws are included for fastening the angle plate
- Installation diameter: 44.5 mm
- We recommend raised head screws DIN 7985 M4, raised head tapping screws DIN 7981 3.9 mm or raised head timber screws Art. 9045 4.0 mm for mounting the angle plate.
Typical applications
- Floorboards and bilge covers
- Hatch covers, cockpit lockers and storage compartments
- Lockers and flaps in interior fit-out, floor hatches in houses
Selection and installation
- Installation requires a hole or cut-out matching the handle diameter; take the dimensions from the handle itself before drilling.
- The version with lock secures storage compartments against unauthorised opening. The watertight version is intended for surfaces exposed to water.
Material and care
Stainless steel A4 corresponds to AISI 316 (V4A, material 1.4401). Besides chromium and nickel it contains a good 2 percent molybdenum and is therefore considerably more resistant to salt water and chloride-laden air than A2. The Blackline fittings have a matt black surface on this material that suits dark decks, carbon, teak and modern interiors.
Care: rinse with fresh water after trips in salt water, clean with a mild soap solution and a soft cloth if necessary. Abrasives, steel wool and polishing pastes attack the matt surface and do not belong on these fittings.
Product and safety information
Manufacturer: Marinetech Edelstahlhandel GmbH & Co. KG, Marschgehren 16, 28779 BremenCountry of origin: Germany
Contact: info@steel-deal.de