Stainless steel screws

Stainless steel screws

Metric screws to DIN and ISO with hexagon, cheese, pan, countersunk and flat round heads, plus sheet metal, self-drilling, wood and timber construction screws, flashing screws, eye screws and security screws in stainless steel. Article number, material and packaging unit are stated for each version.

Items 97 to 102 of 102
ImageDescriptionItem no.DimensionMaterialUnitPriceDelivery timeBuy
Countersunk head tapping screws Torx DIN7982 (ISO14586), stainless steel A419 versionsfrom 0,09 EUR per piece3 to 5 working daysAll versions
Countersunk chipboard screws Torx 9047, stainless steel A411 versionsfrom 0,06 EUR per piece3 to 5 working daysAll versions
Countersunk head screws with hexalobular socket ISO 14581, stainless steel A461 versionsfrom 0,09 EUR per piece3 to 5 working daysAll versions
Countersunk screws, PH cross recess, DIN 965, stainless steel A412 versionsfrom 0,11 EUR per piece3 to 5 working daysAll versions
Hexagon socket head cap screws DIN 912, stainless steel A410 versionsfrom 0,18 EUR per piece3 to 5 working daysAll versions
Countersunk screws with hexagon socket ISO 10642 M10 x 120 mm, stainless steel A410642-10-120Thread M10, Length 120 mmA4 / V4Asingle2,99 EUR per piece3 to 5 working days

Head, drive and thread

A screw is chosen by thread type, head shape and drive. Metric screws need an internal thread or a nut. Sheet metal screws have a sheet metal screw thread to ISO 1478 (abbreviation ST), wood screws a wood screw thread to DIN 7998. The overview above this text shows which standards, materials and dimensions are in the range.

From DIN to ISO

Many DIN standards for screws have been replaced by ISO standards. The differences are mostly small, but important for width across flats and countersunk angle:

DINISOWhat changes
DIN 931 / DIN 933ISO 4014 / ISO 4017Width across flats at M10 (17 to 16 mm), M12 (19 to 18 mm), M14 (22 to 21 mm) and M22 (32 to 34 mm), otherwise the same
DIN 912ISO 4762no changes
DIN 7985ISO 7045no significant changes
DIN 965ISO 7046head height and head diameter slightly different, e.g. M4 with 8.4 mm instead of 7.5 mm head diameter
DIN 7991ISO 10642changed head dimensions
DIN 7981 / 7982 / 7983ISO 7049 / 7050 / 7051for countersunk and raised countersunk heads, countersunk angle 90 instead of 80 degrees; ST 3.9 is dropped
DIN 7504ISO 15480 to 15483self-drilling screws, mechanical properties to ISO 10666

For wood screws to DIN 95, 96, 97 and 571, and for DIN 603, DIN 7500, DIN 7984 and DIN 6912, there is no ISO successor standard.

Strength classes 50, 70 and 80

The mechanical properties of stainless steel screws are governed by ISO 3506 Part 1. The marking states steel grade and strength class: A2 with class 70 means austenitic steel, alloy type 2, tensile strength of at least 700 N/mm², strain hardened. The classes at a glance:

ClassMinimum tensile strengthMinimum 0.2 % proof stressapplies up to
50500 N/mm²210 N/mm²M39
70700 N/mm²450 N/mm²M24
80800 N/mm²600 N/mm²M24

Austenitic stainless steels cannot be hardened; the screws obtain their strength through strain hardening. Above M24, the properties are agreed between user and manufacturer. The values apply without restriction from minus 20 to plus 150 °C; at 100 °C the proof stress falls to around 85 per cent, at 200 °C to around 80 per cent.

Sheet metal, self-drilling and thread-forming screws

Sheet metal screws are available with a point (form C) or a flat end (form F). Guide values for the core hole diameter in metals are given in DIN 7975; for screws in A2 and A4, the values may differ depending on the material. Self-drilling screws drill their own hole and need no pre-drilling. Thread-forming screws to DIN 7500 have a metric thread and form the mating thread in the component as they are driven in.

Avoiding seizing

Stainless steel threads can cold weld when tightened; they seize. The high surface pressure damages the protective oxide layer. Remedies are clean parts, lubrication before screwing together, for instance with molybdenum disulphide or pastes containing metal particles, and a suitable speed when driving in. Graphite-based lubricants are not recommended.

Contact corrosion

The screw should be made of a more noble material than the component. Stainless steel screws are therefore suitable for components made of steel, galvanised steel, aluminium, copper and brass. In a marine atmosphere, aluminium can nevertheless corrode at stainless steel screws when chlorides and a permanently damp contact zone come together; insulating washers or sleeves made of plastic then help.