Stainless steel screws
Metric screws to DIN and ISO with hexagon, cheese, pan, countersunk and flat round heads, plus sheet metal, self-drilling, wood and timber construction screws, flashing screws, eye screws and security screws in stainless steel. Article number, material and packaging unit are stated for each version.
























Head, drive and thread
A screw is chosen by thread type, head shape and drive. Metric screws need an internal thread or a nut. Sheet metal screws have a sheet metal screw thread to ISO 1478 (abbreviation ST), wood screws a wood screw thread to DIN 7998. The overview above this text shows which standards, materials and dimensions are in the range.
From DIN to ISO
Many DIN standards for screws have been replaced by ISO standards. The differences are mostly small, but important for width across flats and countersunk angle:
| DIN | ISO | What changes |
|---|---|---|
| DIN 931 / DIN 933 | ISO 4014 / ISO 4017 | Width across flats at M10 (17 to 16 mm), M12 (19 to 18 mm), M14 (22 to 21 mm) and M22 (32 to 34 mm), otherwise the same |
| DIN 912 | ISO 4762 | no changes |
| DIN 7985 | ISO 7045 | no significant changes |
| DIN 965 | ISO 7046 | head height and head diameter slightly different, e.g. M4 with 8.4 mm instead of 7.5 mm head diameter |
| DIN 7991 | ISO 10642 | changed head dimensions |
| DIN 7981 / 7982 / 7983 | ISO 7049 / 7050 / 7051 | for countersunk and raised countersunk heads, countersunk angle 90 instead of 80 degrees; ST 3.9 is dropped |
| DIN 7504 | ISO 15480 to 15483 | self-drilling screws, mechanical properties to ISO 10666 |
For wood screws to DIN 95, 96, 97 and 571, and for DIN 603, DIN 7500, DIN 7984 and DIN 6912, there is no ISO successor standard.
Strength classes 50, 70 and 80
The mechanical properties of stainless steel screws are governed by ISO 3506 Part 1. The marking states steel grade and strength class: A2 with class 70 means austenitic steel, alloy type 2, tensile strength of at least 700 N/mm², strain hardened. The classes at a glance:
| Class | Minimum tensile strength | Minimum 0.2 % proof stress | applies up to |
|---|---|---|---|
| 50 | 500 N/mm² | 210 N/mm² | M39 |
| 70 | 700 N/mm² | 450 N/mm² | M24 |
| 80 | 800 N/mm² | 600 N/mm² | M24 |
Austenitic stainless steels cannot be hardened; the screws obtain their strength through strain hardening. Above M24, the properties are agreed between user and manufacturer. The values apply without restriction from minus 20 to plus 150 °C; at 100 °C the proof stress falls to around 85 per cent, at 200 °C to around 80 per cent.
Sheet metal, self-drilling and thread-forming screws
Sheet metal screws are available with a point (form C) or a flat end (form F). Guide values for the core hole diameter in metals are given in DIN 7975; for screws in A2 and A4, the values may differ depending on the material. Self-drilling screws drill their own hole and need no pre-drilling. Thread-forming screws to DIN 7500 have a metric thread and form the mating thread in the component as they are driven in.
Avoiding seizing
Stainless steel threads can cold weld when tightened; they seize. The high surface pressure damages the protective oxide layer. Remedies are clean parts, lubrication before screwing together, for instance with molybdenum disulphide or pastes containing metal particles, and a suitable speed when driving in. Graphite-based lubricants are not recommended.
Contact corrosion
The screw should be made of a more noble material than the component. Stainless steel screws are therefore suitable for components made of steel, galvanised steel, aluminium, copper and brass. In a marine atmosphere, aluminium can nevertheless corrode at stainless steel screws when chlorides and a permanently damp contact zone come together; insulating washers or sleeves made of plastic then help.
