Stainless Steel Bolts
Threaded studs and threaded rods, stud bolts, hanger bolts and weld studs in stainless steel A2 and A4. The series group the dimensions of a standard or of a manufacturer's article; article number, material and packaging unit are shown for each version.







Standards, materials and dimensions at a glance
| Standard | Item | Material | Dimensions | Versions |
|---|---|---|---|---|
| DIN 938 | Stud bolts, screw-in end approx. 1d, DIN 938, M12 x 40 mm, stainless steel A2 | A2 / V2A | Ø 12 mm | 1 |
| DIN 939 | Stud bolts, screw-in end approx. 1.25d, DIN 939, A2 stainless steel | A2 / V2A | Ø 8 to 12 mm | 3 |
| DIN 976 | Threaded rod, DIN 976, stainless steel A2 and A4 | A2 / V2A, A4 / V4A | Ø 2 to 24 mm | 24 |
| DIN 976 | Threaded rods 1 metre, DIN 976, stainless steel A4 | A4 / V4A | M4 to M14 | 3 |
| DIN 976 | Threaded stud DIN 976, length 75 mm, stainless steel A4 | A4 / V4A | M6 | 1 |
| ISO 13918 | Weld studs, ISO 13918, PT M8 x 40 mm, stainless steel A2 | A2 / V2A | Ø 8 mm | 1 |
| no DIN/ISO | Hanger bolts, Art. 9082, A2 and A4 stainless steel | A2 / V2A, A4 / V4A | Ø 8 to 10 mm | 2 |
Which stud for which purpose
Studs carry a thread without a head and are fixed with nuts, in an internal thread or by welding. The overview above this text shows which standards, materials and dimensions are in the range.
Threaded studs and threaded rods DIN 976
DIN 976 Part 1 covers threaded studs with metric thread made of steel, stainless steel and non-ferrous metal. Threaded rods can be cut to the length required and are fastened with nuts and washers.
Stud bolts: the screw-in end depends on the material
Stud bolts have two threaded ends. The screw-in end sits firmly in the component, and a nut is fitted to the other end. The length of the screw-in end depends on the material into which it is screwed:
| Standard | Screw-in end | mainly for |
|---|---|---|
| DIN 938 | approx. 1d | Steel |
| DIN 939 | approx. 1.25d | Cast iron |
| DIN 835 | approx. 2d | Aluminium alloys |
d stands for the thread diameter: with M12, the screw-in end according to DIN 938 is therefore approx. 12 mm long. DIN 938 and DIN 939 apply to stud bolts made of steel and stainless steel and have been available in a new edition since August 2025.
Weld studs ISO 13918
ISO 13918 covers studs and ceramic ferrules for arc stud welding; it has replaced DIN 32501 Part 1. Studs of type PT are intended for stud welding with tip ignition. In this process, a capacitor bank discharges across the ignition tip of the stud within a few milliseconds. The process is particularly suitable for thin sheet metal and is usually used up to M8.
Choosing the material
A2 (1.4301) is a widely used stainless steel for fasteners. A4 (1.4401) is alloyed with molybdenum and is considerably more corrosion-resistant; for chlorides on the coast and on boats, A4 is the usual choice. In many marine environments and in swimming pools with chloride-containing cleaning, even A4 reaches its limits.
