Stainless steel concrete screws and anchors
Concrete screws and anchor bolts made of stainless steel for fastening in concrete. Article number, dimensions and packaging unit are given for each version.
| Description | Item no. | Dimension | Material | Unit | Price | Delivery time | ||
|---|---|---|---|---|---|---|---|---|
![]() | Bolt anchor, Option 1, CE ETA 11/0196, stainless steel A46 versions | from 3,99 EUR per piece | 3 to 5 working days | All versions | ||||
| Concrete screws, Art. 9001, 7.5 x 60 mm/5 TX30, stainless steel A4 | 90014275 60 | Diameter 7,5 mm, Length 60 mm | A4 / V4A | Packaging unit: 100 pieces | 4,48 EUR per piece1 PU = 447,69 EUR | 3 to 5 working days | ||
How a concrete screw holds
A concrete screw is screwed into a pre-drilled cylindrical hole. Its special thread cuts an internal thread into the concrete as it goes; the anchoring is achieved by positive locking, so the screw is the anchor itself. Because it holds without expansion pressure, fixings close to the edge are also possible.
Stainless steel A4 for damp rooms and outdoors
Concrete screws made of stainless steel A4 are intended for damp rooms and outdoor use. A4 is alloyed with molybdenum and is considerably more resistant to corrosion than A2.
Anchor bolts
An anchor bolt is a force-controlled expansion anchor for through-fixing; the expansion is achieved by means of an expansion clip. The type of concrete it is suitable for is stated in its European Technical Assessment (ETA).
Drilling and design
Drill diameter, drilling depth and screw-in depth depend on the manufacturer's specifications. For load-bearing anchorings, the design is based on the European Technical Assessment (ETA) of the respective anchor system and the standard stated therein; the installation must comply with these requirements.

